MÔJ KOŠÍK
Môj košík je prázdny
Multiprepínače
Signal
9/12 Multiswitch: Signal MP-0912
(active terrestrial TV)
Kód tovaru: R6944812
 
Cena s DPH
Zľava
Počet
111,74 EUR
0 %
9/12 Multiswitch: Signal MP-0912<br />(active terrestrial TV)
View of the multiswitch
9/12 Multiswitch: Signal MP-0912<br />(active terrestrial TV)
Top view
New family of Signal multiswitches has been designed for small SMATV systems installed in one-family houses, small apartment houses etc. The biggest advantage of the new series is better - than in the case of the predecessor - separation between inputs. The multiswitches have built-in compensation of cable attenuation. This eliminates the impact of cable attenuation with increasing frequency, so we get the same signal levels in the entire band.
The device distributes signals from two satellites and terrestrial television to up to twelve subscriber sockets. It has been designed for one-family houses and small apartment buildings. We can therefore connect up to twelve single satellite receivers. If some receiver has a hard drive (PVR), its double tuner will need connection with two outputs of the multiswitch. Any unused output of the multiswitch must be terminated with 75 ohm resistor (R66205).
Signal multiswitches are very attractive offer for radial installations (one multiswitch, the signal distributed radially) up to 16 outlets, distributing signals from one, two or four satellites. They are ideal devices for one-family houses, small apartment houses etc. In DIPOL Library we show example diagrams of such installations.
For cascadable solutions - larger systems and/or lower terrestrial signals (requiring to use external RF amplifiers) - we recommend high-quality TERRA multiswitches. A lot of information on designing large multiswitch systems has been collected in Professional multiswitch systems.
Maximum output level 91 dB of the terrestrial terrestrial path means in practice that the input signals cannot exceed 88 dB. Signals with a higher level will overdrive transistor switches, blocking satellite signal. Output level of SAT signals does not depend on the number of outputs used.
The multiswitch is suitable for indoor use only.
The offer of Signal multiswitches also includes:
  • 9/4 multiswitch R6944804
  • 9/8 multiswitch R6944808
  • 9/16 multiswitch R6944816
  • as well as 5-input multiswitches with 5, 8, 12, and 16 outputs.
Specifications
Name MP-0812 Signal
Code R6944812
Frequency range
47-2150 MHz
Number of inputs
8 SAT (LNB...) + 1 TV (TERR.)
Number of outputs
12 (REC...)
Gain
SAT
Outputs 1-4 1...4 dB
Outputs 5-8 -1...1 dB
Outputs 9-12 -3...-2 dB
TV
Outputs 1-4 8...10 dB
Outputs 5-8 6...8 dB
Outputs 9-12 4...6 dB
Insertion loss
TV
-1 dB
SAT
-3 dB
Linearity
TV
±2 dB
SAT
±2 dB
Isolation Between TV and SAT inputs 28 dB
Between inputs
TV 28 dB
SAT 30 dB
Between TV and SAT inputs
12 dB
Return loss
TV input
10 dB
SAT inputs 11 dB
Outputs 10 dB
Max output level SAT: EN50083-3 93 dBµV
TV: EN50083-5 91 dBµV
Switching commands 13 V, 18 V
Switching threshold voltage 15±0.5 V
Total LNB current Max 600 mA
Supplying voltage 90-240 VAC; 40-60 Hz
Cena s DPH
Zľava
Počet
111,74 EUR
0 %
 
DOKONČI
KNIŽNICA SEKCIE
NOVINKY V KNIŽNICI
PREČÍTAJTE SI