Môj košík je prázdny



Battery-oper. Motion Sensor: F&Home Radio rH-P1
Kód tovaru: F1801
Bez DPHCena s DPHZľavaPlatnosť  
71,22 EUR85,46 EUR0 %
Battery-oper. Motion Sensor: F&Home Radio rH-P1
View of the device

Battery-oper. Motion Sensor: F&Home Radio rH-P1
The included accessories
The rH-P1 module is a low power, passive motion detector. It detects the presence of people through changes in infrared radiation and transmits the information about each change to the system. The communication with the server takes place by radio. The module is particularly suitable for controlling lighting, a ventilation fan, as an element of integrated alarm system.
Symbol in design and configuration software:
The symbol of rH-P1
The rH-P1 module is represented by object that consists of one binary (two-state) input and output. When someone is detected, the object generates the logic state "1", otherwise the state is "0".
  • Unscrew the sensor housing.
  • Unscrew and take out the electronics board.
  • Using two screws fasten the back cover of the sensor to the joint.
  • Mount the electronics board.
  • Pull out the battery protective foil.
  • Assemble the sensor housing.
  • Mount the bracket on a wall according to installation recommendations given below.
  • Place the sensor on the bracket.
The installation recommendations:
The motion sensor should not be installed in front of windows or in areas exposed to direct sunlight.
Make sure that the sensor has the appropriate field of view (no obstructions like flowers, furniture, partitions etc).
It is not recommended to mount the sensor in the vicinity of heating or air-conditioning equipment that can significantly alter the ambient temperature during a comparatively short time.
The sensor should be mounted on a rigid surface, at a minimum height of 2.4 m.
The motion sensor exhibits greater sensitivity to movement across the detection zone than in the direction of the sensor.
The detection area - view from the top
The detection area - side view
An example application:
In the diagram above, in the case of motion detection the F1810 sensor provides logic state "1" and the relay of the F1211 module switches on the lamp. The second channel of the F1211 module can be used e.g. for switching light in another room.
About the system:
NameF&Home Radio rH-P1
Batteries2x AAA
Battery lifetime12 - 36 miesięcy
RF communication band [MHz]868
Communication modeone-way with ack
Data encryptionYES
Open space range (RF communication)
100 m
Detection area
110°; 15 m
Weight/height sensitivity18 kg / 60 cm
Battery monitoringYES
Operating temperature range
-20ºC ...+50ºC
Operating humidity / environment<= 85% (no condensation of
water vapor) / no aggressive gasses
The hardware dead-time4 seconds
Dimensions [mm]112x66x45
Ingress protection ratingIP 20
F&HOME RADIO integrates electrical installations in such a way that the processes of heating, air conditioning, ventilation, lighting, alarm and access control form one efficient system - all for the safety and comfort of the residents. With wireless two-way communication between the central unit (server) and both sensors and actuators, software solutions, as well as remote control of the system that can performed by the users in many ways, the system allows them to manage home energy resources in a manner appropriate to their needs.
In practice, this means the ability to integrate electrical appliances in such a way that a hand gesture can create a romantic light scene in the living room and bedroom, pull down the shutters or blinds and adjust the interior temperature, for example. The option of remote control via the Internet ensures that even after our return from a long journey we are welcomed by the house as if we have never left.
Bez DPHCena s DPHZľavaPlatnosť  
71,22 EUR85,46 EUR0 %
Battery-oper. Motion Sensor: F&Home Radio rH-P1
Kód tovaru: F1801