NETSET BOX UTP 5e Ethernet cable far exceeds the requirements for Category 5e twisted pair cables.

View of the cable box - inside 305m of the cable.
Dimensions of the box: height - 35 cm, width - 20 cm, depth - 35 cm

Close-up

NETSET BOX UTP CAT 5e E1408 cable is the highest-quality twisted pair cable designed for data transmission sytems inside buildings.

NETSET BOX is the latest generation of NETSET twisted-pair cables.
Its outer diameter has been reduced to 5.0 mm, which considerably facilitates installation of the data cable in trays and pipes. Special insulation material has been selected to make it easier to put on RJ-45 connectors.

Distinguishing features of NETSET BOX UTP cat 5e cable E1408:

NETSET UTP cat 5e E1408 cable is manufactured in compliance with:
IEC 61156-6 (2000), ISO/IEC 11801 (2000), ANSI/TIA/EIA-568-A (1995), EN 50173 (1999), yd/t1019-2001 norms.

The manufacturer guarantees stability of the parameters given in the "Specifications" at least for six years, on the condition that the cable is packed, transported, installed, and used according to harmonized European standards (among others: EN 50174-1), within the permissible environmental conditions (see the "Specifications" below).

The NETSET UTP cat 5e E1408 cable can be used in a wide temperature range: -40...+70 ^oC, and installed between 0 and +50 ^oC. Minimum bending radius factor (radius to diameter ratio) is 4.

Name	NETSET BOX UTP 5e
Code	E1408
Structure
Conductors	solid copper wires Ø 0.50 mm (24 AWG)
Wire insulation	PE
Sheath	PVC (gray, RAL 7032)
Outer diameter [mm]	5.0 ±0.3
Copper content [kg/km]	14.9
Weight [kg/km]	28.5
Electrical parameters
Wave impedance [Ω]	100 ±15
Capacitance of any transmission path at 1kHz [nF/km]	50 ±1
Nominal Velocity of Propagation (NVP) [%]	67
Resistance of any transmission path [Ω/km]	≤ 188
Asymmetry in capacitance of transmission paths to the ground [pF/km]	≤ 1600
Insulation resistance [MΩ/km]	> 500
Installation and operation
Operating temperature range [oC]	-20...+70
Operating humidity range [%]	0...100
Installation temperature range [oC]	0...+50
Minimum bending radius [radius to diameter ratio]	>8

The Certificate of National Institute of Telecommunications for NETSET BOX UTP CAT5e cable is available here.

	Pair	Wire	Wire resistance [Ω/km]	Resistance asymetry [%]
UTP cat. 5e	1	a	93.6	0.2
		b	93.8
	2	a	91.7	0.4
		b	91,3
	3	a	91.8	0.1
		b	91,7
	4	a	92.3	0.1
		b	92.2
Required	-	-	≤150	≤3.0

	Pair	Capacitance [nF/km]	Capacitance asymmetry [pF/km]
UTP cat 5e	1	49.55	217
	2	48.19	26
	3	49.32	88
	4	47.28	229
Required	-	≤55	≤1600

	Pair	Wire	Insulation resistance [MΩ/km]
UTP cat 5e	1	a	3.0 · 105
		b	2.8 · 105
	2	a	7.6 · 105
		b	7.7 · 105
	3	a	5.4 · 105
		b	5,1 · 105
	4	a	7.7 · 105
		b	7.0 · 104
Required	-	-	≥150

Test voltage	[VAC]
	Applied	Required
	1000	1000

	Pair	Attenuation [dB]
UTP cat 5e	1	23.6
	2	24
	3	23.8
	4	24.2
Required	-	≤24.2

	Pair to pair	NEXT [dB]
UTP cat 5e	1-2	42.3
	1-3	39.8
	1-4	44.1
	2-3	36.7
	2-4	38.8
	3-4	39.4
Required	-	≥34.0

	Pair	Return loss [dB]
UTP cat 5e	1	22.7
	2	29.1
	3	25.3
	4	22.1
Required	-	≥19.4

	Pair	Total Near End Cross Talk - PS-NEXT [dB]
UTP cat. 5e	1	36.94
	2	33.93
	3	33.63
	4	35.44
Required	-	≥31.0

NETSET BOX UTP 5e cable far exceeds the requirements for Category 5e twisted pair cables.