- integration with any IP monitoring system,
- remote viewing of images via Internet Explorer from any place in the world,
- remote management of cameras via Internet Explorer from any place in the world,
- possibility of using https protocol (encryption),
- analog video signal on BNC output, parallel to IP interface,
- remote recording of images/sound on the computer (via Internet Explorer),
- Power over Ethernet (PoE)
- remote viewing of images via VLC or Quick Time Player,
- capturing viewed images (as JPEG or BMP) and saving them on computer any moment (via Internet Explorer),
- Dual Streaming,
- automatic adaptation (kind of stream - VBR/CBR, quality/bandwidth, frame rate) to the schedule (day, night, weekend),
- possibility of using external Pan-Tilt device (control via RS485 or RS 232 port - protocols: Lilin, PELCO-D, PELCO-P, DynaColor),
- performing programmed actions after motion detection. loss of video and/or activation of alarm input:
- sending short AVI files to an ftp server,
- sending short AVI files as e-mail attachment,
- activation of alarm output,
- local recording on USB drive connected directly to the camera,
- remote playback of recordings from USB drive connected directly to the camera,
- after placing the camera in outdoor housing Marathon MH-816/12 M5407 - outdoor applications.
- 12VDC input - power
- RJ45 connector - network interface, PoE
- 2.5mm female jack - audio out
- 2 x USB 2.0 - for external storage devices
- mini DIN - for connecting special cable extension with additional connectors:
- BNC - analog video output (for monitor, DVR etc.)
- RS485 (terminal strip) - for PT device
- alarm input (terminal strip)
- alarm output (terminal strip)
In each video format the user can set compression level which influences image quality and bandwidth requirements. Additionally, in MPEG-4 format it is possible to choose CBR or VBR option and change advanced Group of Picture (GOP) settings. The MPEG-4 streaming uses RTSP protocol.
- advanced compression and image parameters settings associated with operating schedule (daytime, nighttime, weekend):
- resolution (independent for each stream),
- frame rate ( interchangeably between streams, max. 25 fps for both streams),
- MPEG-4:
- bitrate options:
- Constant Bitrate (CBR) - from 64kbps to 4Mbps (influences quality of image),
- Variable Bitrate (VBR) - choice among 27 quality levels (actual bitrate depends on variability of the scene and the chosen quality level),
- GOP size,
- MPEG-4 version (ASP, SP),
- MPEG-4 settings associated with operating schedule,
- MJPEG (only second stream):
- choice among 90 quality levels,
- video settings:
- PTZ settings:
- ON/OFF
- protocol (Lilin, PELCO-D, PELCO-P, DynaColor),
- ID,
- speed,
- insertion of OSD information,
- reaction to events (motion detection, external alarm, video loss),
- defining motion detection area and parameters,
- alarm output settings,
- remote information on camera (firmware version, MAC address),
- synchronization of date and time with NTP server or manual settings,
- defining access rights (administrator, operator, or user),
- advanced settings of COM port,
- remote restart and restoration of default settings,
- information on camera status,
- audio settings,
- assignment of IP address from DHCP server or insertion of static parameters (IP address, subnetwork mask, default gateway, DNS server), reading of MAC address, choice of communication protocol (HTTP, HTTPS), change of standard ports (camera management, MJPEG, sound: port 80 - http) and MPEG-4 (port 554 - RTSP),
- DynDNS settings,
- assigning email addresses of the source and destination user (for sending short AVI files or information on the event)
- assigning FTP server for sending short AVI files,
- PPPoE settings,
- USB settings,
- image rotation,
- interlaced scanning options.
- brightness, contrast, saturation, backlight compensation, automatic electronic shutter, OSD settings (date, time, camera name),
- Ethernet patch cable
- wall bracket
- cable adapter: mini DIN / BNC(video) and terminal strip (RS485, alarm in, alarm out)
- Allan wrench
- mount accessories
- quick installation guide
- user's manual
- IPInstaller utility - for searching IP PiXORD cameras in the network
- PiXORD Component Installer - for integration of PiXORD plugins with Internet Explorer
- instructions for PiXORD Component Installer
- DirectX
- XviD codec
- QuickTime player
- Adobe Flash Player plugin for Internet Explorer
- managing utility - IP monitoring system IP P6100
| Systém | Vstavaný Linux, 32-Bit RISC procesor, 8MB Flash ROM, 64MB SDRAM | |
| Kompresia videa | MPEG-4 ASP / MJPEG, Dual streaming | |
| Rozlíšenie videa | Plné D1: NTSC = 720x480; PAL = 720x576 polovičné D1: NTSC = 720x240; PAL = 720x288 CIF: NTSC = 352x240; PAL = 352x288 | |
| Snímková rýchlosť | Až do 30(NTSC) / 25(PAL) | |
| Snímač | 1/3” Sony SuperHAD CCD | |
| Typ objektívu | CS úchyt, pevná clona, ohnisková vzdialenosť 6.0mm, F1.6; vybavená konektorom DC-iris jack pre pripojenie AI objektívu | |
| Horizontálne rozlíšenie | Viac ako 480 TV riadkov | |
| Min. osvetlenie | 0,5lx pri F2.0 | |
| Vyváženie bielej | Auto | |
| Kompenzácia protisvetla | Voliteľné ON/OFF | |
| Automatická elektronická uzávierka | Voliteľné ON/OFF | |
| Systém udalostí | Spúšťanie | GPIN, detekcia pohybu |
| Akcia | GPOUT, FTP, Email a výstražná správa | |
| Lokálne úložisko | Podpora plánovača / záznam podľa udalostí na externý USB2.0 port | |
| Sieťové rozhranie | 10/100 Base-T Ethernet, voliteľne IEEE 802.11b/g wireless LAN cez USB (aktualizovať FW) | |
| Protokoly | TCP(UDP)/IP, HTTP, FTP, PPPoE, SMTP, DHCP, NTP, DDNS, RTSP, RTP/TCP(UDP) | |
| Možnosti Audio | 1x vstavaný mikrofón, 1x 2.5mm linkový výstup jack (aktualizovať FW) | |
| Napájanie | Spínaný DC adaptér, výstup: DC 12V/1,5A Voliteľné napájanie cez PoE IEEE 802.3af | |
| Pracovná teplota | 5 ... 45°C | |
| Pracovná vlhkosť | 20% - 80% RHG | |
| Rozmery (D x Š x V) | 135mm x 85mm x 40mm | |
| Netto hmotnosť | 0,60kg | |
| I/O konektory | Dva USB 2.0 porty pre externé úložisko alebo wireless LAN (aktualizovať FW), jeden Mini-DIN pre RS-485/Photo-coupled GPIN/Relay GPOUT/Video výstup, dierka pre Reset tlačidlo, RJ-45 Ethernet konektor s dvoma LED, napájací konektor | |
| Obsah balenia | CD (manuál a software), jeden Ethernet kábel, kábel MiniDin -> Terminal block extend, podložka pod držiak, DC adaptér (nie je súčasťou dodávky pri verzii PoE) | |
