Slovenský
Polski
English
Česky
Deutsch
Irish
Magyar
Português
Română
How to attach RJ-45 connector to cat 5 UTP cable. Male RJ-45 connector J2008 (8P8C category 5e for UTP/FTP cables with solid wires) used for computer network cables. NETSET BOX UTP CAT 5e E1408 cable is the highest-quality twisted pair cable designed for professional data transmission systems inside buildings (structural wiring, LANs). Crimping Tool HT-210N J9210 for RJ-45 plugs. Cable Tester (RJ-45, RJ-11) N7055 helps installers to build LAN systems and service existing networks. It tests cable continuity, detects shorts circuits and incorrect connections. The device can be used for UTP/FTP cables terminated with RJ-45 connectors or for telephone cables terminated with RJ-11 phone plugs.
Detaily
The NETSET BOX U/UTP 5e cable far exceeds the requirements for Category 5e twisted pair cables.
NETSET cables are compliant with the Construction Products Regulation (CPR) and EN 50575 harmonized European standard that specifies reaction to fire performance requirements, test and assessment methods for electric cables for use in construction works.
According to guidelines of the Association of Polish Electrical Engineers guidelines, CPR class Cca cable must be installed outside escape routes in the following buildings:
- residential and community residences
- high (25 to 55 m) and high-rise (more than 55 m) above ground level or residential with more than 9 to 18 overground storeys inclusive
- having rooms intended for the simultaneous presence of more than 50 persons who are not their permanent occupants, and not intended primarily for the use of people with reduced mobility
- primarily for the use of people with reduced mobility, such as hospitals, nurseries, kindergartens, homes for the elderly
- commercial.
The requirements for using cables with a specific reaction to fire class in a given type of building should be based on a risk analysis made by the installation designer or other national formal and legal documents. The CPR Directive does not impose on the EU Member States the requirements for types of buildings and associated cables with specific fire reaction classes. The reaction to fire class of cables and other conductors installed within evacuation routes should not be less than B2ca-s1b, d1, a1. For this purpose, class B2ca cable - E1615_500 - NETSET U/UTP category 6 B2ca-s1a-d1-a1 cable should be used.
The NETSET U/UTP cat. 5e 5e is the finest-quality twisted pair cable designed for professional data transmission systems inside buildings.
The NETSET cable comes from the latest generation of UTP twisted pair cables. Its external diameter has been reduced to 5.0 mm, which considerably facilitates insertion of the cable into ducts and pipes. Special insulation material makes it easier to attach RJ-45 connectors.
Distinguishing features of the NETSET UTP PE 5e cable:
- top quality materials, made to tight specifications, proven with a, 15-year quality guarantee,
- flammability class Cca s1a s1a, d1, a1
- preliminary quality control of materials and thorough tests of the finished product,
- meter markers,
- cooper solid wires diameter 0.565 mm,
- insulation of conductors made of insulating, mass-coloured HDPE, conductor diameter: 0.87 mm, insulation colors: white-green/green, white-orange/orange, white-brown/brown, white-blue/blue,
- cable sheath made of LSZH compliant material, outer diameter 5.4 mm,
- length marker print error max. 0.5%
The NETSET U/UTP cat 5e E1414 LAN cable is manufactured in compliance with the following standards:
EN50575:2014, EN60332-1-2:2004, EN50399:2011, EN60754-2:2014, EN 13501-6:2014.
EN50575:2014, EN60332-1-2:2004, EN50399:2011, EN60754-2:2014, EN 13501-6:2014.
The cable comes with a 15-year warranty.
The manufacturer guarantees the stability of parameters for at least 15 years, on the condition that the cable is packed, transported, installed, and used according to adequate European standards (among others E-79100 and EN 50174-1), within the permissible environmental conditions.
The NETSET NETSET U/FTP Category 5e E1415 twisted pair cable is intended for use in an environment with temperature from -20oC to +50 oC. Installation temperature not lower than 0oC and not higher than +50oC. The bending radius should not be less than 8 times the outside diameter.
Test results
- Return Loss
| Frequency [MHz] | Result (min.) [dB] |
| 1 | 20,0 |
| 4 | 23,0 |
| 8 | 24,5 |
| 10 | 25,0 |
| 16 | 25,0 |
| 20 | 25,0 |
| 25 | 24,3 |
| 31,25 | 23,6 |
| 62,5 | 21,5 |
| 100 | 20,1 |
- Attenuation
| Frequency [MHz] | Result [dB] |
| 1 | 2,0 |
| 4 | 4,1 |
| 8 | 5,8 |
| 10 | 6,5 |
| 16 | 8,2 |
| 20 | 9,3 |
| 25 | 10,4 |
| 31,25 | 11,7 |
| 62,5 | 17 |
| 100 | 22 |
- NEXT (near end crosstalk)
| Frequency [MHz] | Result (min.) [dB] |
| 1 | 65,3 |
| 4 | 56,3 |
| 8 | 51,8 |
| 10 | 50,3 |
| 16 | 47,2 |
| 20 | 45,8 |
| 25 | 44,3 |
| 31,25 | 42,9 |
| 62,5 | 38,4 |
| 100 | 35,3 |
- PSNEXT (power sum near end crosstalk)
| Frequency [MHz] | Result (min.) [dB] |
| 1 | 62,3 |
| 4 | 53,3 |
| 8 | 48,8 |
| 10 | 47,3 |
| 16 | 44,4 |
| 20 | 42,8 |
| 25 | 41,3 |
| 31,25 | 39,9 |
| 62,5 | 35,4 |
| 100 | 32,3 |
- ELFEXT (equal level far end crosstalk loss testing)
| Frequency [MHz] | Result (min.) [dB] |
| 1 | 63,8 |
| 4 | 51,8 |
| 8 | 45,7 |
| 10 | 43,8 |
| 16 | 39,7 |
| 20 | 37,8 |
| 25 | 35,8 |
| 31,25 | 33,9 |
| 62,5 | 27,9 |
| 100 | 23,8 |
- PSELFEXT (power sum equal level far end crosstalk loss testing)
| Frequency [MHz] | Result (min.) [dB] |
| 1 | 60,8 |
| 4 | 48,8 |
| 8 | 42,7 |
| 10 | 40,8 |
| 16 | 36,7 |
| 20 | 34,8 |
| 25 | 32,8 |
| 31,25 | 30,9 |
| 62,5 | 24,9 |
| 100 | 20,8 |
Technické dáta
| Name | NETSET U/UTP cat. 5e | ||
| Product type | |||
| Manufacturer | Dipol | ||
| Brand | NETSET | ||
| Cable type | U/UTP | ||
| Aplikácie | |||
| Category | 5e | ||
| Cable length | m | 500 | |
| CPR class | Cca-s1a,d1,a1 | ||
| Fyzikálne vlastnosti | |||
| Conductor | Material | Cooper | |
| Diameter | mm | ||
| Conductor insulation | Material | HDPE (polyethylene) | |
| Diameter | mm | ||
| Twisted pairs | colors | white-brown/brown, white-blue/blue, white-orange/orange, white-green/green | |
| sheath | Diameter | mm | |
| thickness | mm | ||
| Color | RAL7032 (gray) | ||
| Gel filled | No | ||
| Carrier cable | No | ||
| Spline | No | ||
| Length marker print error | <0.5 | ||
| Elektrické parametre | |||
| Impedance | Ohm | 100 | |
| Nominal Velocity of Propagation NVP | 69 | ||
| Delay skew | ns/100 m | <45 | |
| DC resistance | Ohm/100 m | ||
| Resistance asymmetry | <5 | ||
| Return Loss | 1 MHz | ≥dB | 20 |
| 4 MHz | ≥dB | 23 | |
| 8 MHz | ≥dB | ||
| 10 MHz | ≥dB | 25 | |
| 16 MHz | ≥dB | 25 | |
| 20 MHz | ≥dB | 25 | |
| 25 MHz | ≥dB | ||
| 31.25 MHz | ≥dB | ||
| 62.5 MHz | ≥dB | ||
| 100 MHz | ≥dB | ||
| Loss | 1 MHz | ≤dB | 2 |
| 4 MHz | ≤dB | ||
| 8 MHz | ≤dB | ||
| 10 MHz | ≤dB | ||
| 16 MHz | ≤dB | ||
| 20 MHz | ≤dB | ||
| 25 MHz | ≤dB | ||
| 31.25 MHz | ≤dB | ||
| 62.5 MHz | ≤dB | 17 | |
| 100 MHz | ≤dB | 22 | |
| NEXT (near-end crosstalk) | 1 MHz | ≤dB | |
| 4 MHz | ≤dB | ||
| 8 MHz | ≤dB | ||
| 10 MHz | ≤dB | ||
| 16 MHz | ≤dB | ||
| 20 MHz | ≤dB | ||
| 25 MHz | ≤dB | ||
| 31.25 MHz | ≤dB | ||
| 62.5 MHz | ≤dB | ||
| 100 MHz | ≤dB | ||
| PSNEXT (power sum near-end crosstalk) | 1 MHz | ≥dB | |
| 4 MHz | ≥dB | ||
| 8 MHz | ≥dB | ||
| 10 MHz | ≥dB | ||
| 16 MHz | ≥dB | ||
| 20 MHz | ≥dB | ||
| 25 MHz | ≥dB | ||
| 31.25 MHz | ≥dB | ||
| 62.5 MHz | ≥dB | ||
| 100 MHz | ≥dB | ||
| ELFEXT | 1 MHz | ≥dB | |
| 4 MHz | ≥dB | ||
| 8 MHz | ≥dB | ||
| 10 MHz | ≥dB | ||
| 16 MHz | ≥dB | ||
| 20 MHz | ≥dB | ||
| 25 MHz | ≥dB | ||
| 31.25 MHz | ≥dB | ||
| 62.5 MHz | ≥dB | ||
| 100 MHz | ≥dB | ||
| PSELFEXT (power sum far-end crosstalk) | 1 MHz | ≥dB | |
| 4 MHz | ≥dB | ||
| 8 MHz | ≥dB | ||
| 10 MHz | ≥dB | ||
| 16 MHz | ≥dB | ||
| 20 MHz | ≥dB | ||
| 25 MHz | ≥dB | ||
| 31.25 MHz | ≥dB | ||
| 62.5 MHz | ≥dB | ||
| 100 MHz | ≥dB | ||
| Mechanické vlastnosti | |||
| Pracovná teplota | °C | -20...+70 | |
| Installation temperature | °C | 0...+50 | |
| Minimum bending radius for indoor installation | Diameter | >8 | |
| Packaging | |||
| Spool | Diameter | mm | 380 |
| Width | mm | 385 | |
| spool hole diameter | mm | 33 | |