How to attach RJ-45 connector to cat 5 UTP cable. Male RJ-45 connector J2008 (8P8C category 5e for UTP/FTP cables with solid wires) used for computer network cables. NETSET BOX UTP CAT 5e E1408 cable is the highest-quality twisted pair cable designed for professional data transmission systems inside buildings (structural wiring, LANs). Crimping Tool HT-210N J9210 for RJ-45 plugs. Cable Tester (RJ-45, RJ-11) N7055 helps installers to build LAN systems and service existing networks. It tests cable continuity, detects shorts circuits and incorrect connections. The device can be used for UTP/FTP cables terminated with RJ-45 connectors or for telephone cables terminated with RJ-11 phone plugs.
Detaily
NETSET BOX U/UTP PE Cat. 6 E1610 is a top quality twisted-pair cable designed for professional data transmission systems installed outdoors. Its polyethylene (PE) sheath is resistant to UV radiation (sunlight) and moisture. The cable put into ducts or trays can be used in installations buried in the ground.
The outer diameter of the NETSET U/UTP Cat. 6 cable has been reduced to 6.1 mm, which considerably facilitates laying of the cable in ducts and pipes. The insulation of the wires has been made of special PE, to make it easier to crimp RJ-45 connectors onto the cable.
Distinguishing features of NETSET BOX U/UTP PE Cat. 6 cable:
- highest-quality materials, strict technological discipline confirmed by a 15-year quality guarantee,
- preliminary quality control of materials and thorough tests of the final product,
- meter markers, length error less than 0.5%,
- solid wires of 0.54 mm diameter (24 AWG),
- wire insulation made of homogeneous, colored PE; outer diameter: 0.94 mm; colors: white-green/green, white-orange/orange, white-brown/brown, white-blue/blue,
- insulated wires twisted in pairs of 2.02 mm diameter,
- sheath made of black PE, outer diameter of 6.0 mm.
The NETSET U/UTP PE Cat. 6 E1610 cable is manufactured in compliance with EN50575:2014 standard.
The cable comes with a 15-year warranty.
The manufacturer guarantees stability of parameters at least for 15 years, on the condition that the cable is packed, transported, installed, and used according to adequate European standards (among others E-79100 and EN 50174-1), within the permissible environmental conditions.
The NETSET BOX U/UTP PE Cat. 6 E1610 cable can be used in a wide temperature range: -20o...+50oC, and installed between -30o...+50 oC.
Test results
- Return Loss
Frequency [MHz] | Result (min.) [dB] |
1 | 20,0 |
4 | 23,0 |
8 | 24,5 |
10 | 25,0 |
16 | 25,0 |
20 | 25,0 |
25 | 24,3 |
31,25 | 23,6 |
62,5 | 21,5 |
100 | 20,1 |
200 | 18,0 |
250 | 17,3 |
- Attenuation
Frequency [MHz] | Result (max.) [dB] |
1 | 2,03 |
4 | 3,78 |
8 | 5,32 |
10 | 5,95 |
16 | 7,55 |
20 | 8,47 |
25 | 9,51 |
31,25 | 10,67 |
62,5 | 15,38 |
100 | 19,80 |
200 | 28,98 |
250 | 32,85 |
- NEXT (near end crosstalk)
Frequency [MHz] | Result (min.) [dB] |
1 | 74,3 |
4 | 65,3 |
8 | 60,8 |
10 | 59,3 |
16 | 56,2 |
20 | 54,8 |
25 | 53,3 |
31,25 | 51,9 |
62,5 | 47,7 |
100 | 44,3 |
200 | 39,8 |
250 | 38,3 |
- PSNEXT (power sum near end crosstalk)
Frequency [MHz] | Result (min.) [dB] |
1 | 72,3 |
4 | 63,3 |
8 | 58,8 |
10 | 57,3 |
16 | 54,2 |
20 | 52,8 |
25 | 51,3 |
31,25 | 49,9 |
62,5 | 45,4 |
100 | 42,3 |
200 | 37,8 |
250 | 36,3 |
- ELFEXT (equal level far end crosstalk loss testing)
Frequency [MHz] | Result (min.) [dB] |
1 | 67,8 |
4 | 55,8 |
8 | 49,7 |
10 | 47,8 |
16 | 43,7 |
20 | 41,8 |
25 | 39,8 |
31,25 | 37,9 |
62,5 | 31,9 |
100 | 27,8 |
200 | 21,8 |
250 | 19,8 |
- PSELFEXT (power sum equal level far end crosstalk loss testing)
Frequency [MHz] | Result (min.) [dB] |
1 | 64,8 |
4 | 52,8 |
8 | 46,7 |
10 | 44,8 |
16 | 40,7 |
20 | 38,8 |
25 | 36,8 |
31,25 | 34,9 |
62,5 | 28,9 |
100 | 24,8 |
200 | 18,8 |
250 | 16,8 |
The parameters show that the NETSET BOX U/UTP PE Cat. 6 cable fulfills all requirements for Category 6 cables, with a large safety margin.
Technické dáta
Name | NETSET U/UTP cat. 6 external | ||
Product type | |||
Manufacturer | Dipol | ||
Brand | NETSET | ||
Cable type | U/UTP | ||
Aplikácie | |||
Category | 6 | ||
Cable length | m | 305 | |
CPR class | FCA | ||
Fyzikálne vlastnosti | |||
Conductor | Material | Cooper | |
Diameter | mm | ||
Conductor insulation | Material | HDPE (polyethylene) | |
Diameter | mm | ||
Twisted pairs | colors | white-brown/brown, white-blue/blue, white-orange/orange, white-green/green | |
sheath | Material | LDPE | |
Diameter | mm | ||
thickness | mm | ||
Color | RAL9005 (black) | ||
Gel filled | No | ||
Carrier cable | No | ||
Rip-cord | Yes | ||
Spline | Yes | ||
Length marker print error | <0.5 | ||
Elektrické parametre | |||
Impedance | Ohm | 100 | |
Nominal Velocity of Propagation NVP | 67 | ||
Delay skew | ns/100 m | <45 | |
DC resistance | Ohm/100 m | ||
Resistance asymmetry | <5 | ||
Return Loss | 1 MHz | ≥dB | 20 |
4 MHz | ≥dB | 23 | |
8 MHz | ≥dB | ||
10 MHz | ≥dB | 25 | |
16 MHz | ≥dB | 25 | |
20 MHz | ≥dB | 25 | |
25 MHz | ≥dB | ||
31.25 MHz | ≥dB | ||
62.5 MHz | ≥dB | ||
100 MHz | ≥dB | ||
200 MHz | ≥dB | 18 | |
250 MHz | ≥dB | ||
Loss | 1 MHz | ≤dB | 2 |
4 MHz | ≤dB | ||
8 MHz | ≤dB | ||
10 MHz | ≤dB | ||
16 MHz | ≤dB | ||
20 MHz | ≤dB | ||
25 MHz | ≤dB | ||
31.25 MHz | ≤dB | ||
62.5 MHz | ≤dB | ||
100 MHz | ≤dB | ||
200 MHz | ≤dB | ||
250 MHz | ≤dB | ||
NEXT (near-end crosstalk) | 1 MHz | ≤dB | |
4 MHz | ≤dB | ||
8 MHz | ≤dB | ||
10 MHz | ≤dB | ||
16 MHz | ≤dB | ||
20 MHz | ≤dB | ||
25 MHz | ≤dB | ||
31.25 MHz | ≤dB | ||
62.5 MHz | ≤dB | ||
100 MHz | ≤dB | ||
200 MHz | ≤dB | ||
250 MHz | ≤dB | ||
PSNEXT (power sum near-end crosstalk) | 1 MHz | ≥dB | |
4 MHz | ≥dB | ||
8 MHz | ≥dB | ||
10 MHz | ≥dB | ||
16 MHz | ≥dB | ||
20 MHz | ≥dB | ||
25 MHz | ≥dB | ||
31.25 MHz | ≥dB | ||
62.5 MHz | ≥dB | ||
100 MHz | ≥dB | ||
200 MHz | ≥dB | ||
250 MHz | ≥dB | ||
ELFEXT | 1 MHz | ≥dB | |
4 MHz | ≥dB | ||
8 MHz | ≥dB | ||
10 MHz | ≥dB | ||
16 MHz | ≥dB | ||
20 MHz | ≥dB | ||
25 MHz | ≥dB | ||
31.25 MHz | ≥dB | ||
62.5 MHz | ≥dB | ||
100 MHz | ≥dB | ||
200 MHz | ≥dB | ||
250 MHz | ≥dB | ||
PSELFEXT (power sum far-end crosstalk) | 1 MHz | ≥dB | |
4 MHz | ≥dB | ||
8 MHz | ≥dB | ||
10 MHz | ≥dB | ||
16 MHz | ≥dB | ||
20 MHz | ≥dB | ||
25 MHz | ≥dB | ||
31.25 MHz | ≥dB | ||
62.5 MHz | ≥dB | ||
100 MHz | ≥dB | ||
200 MHz | ≥dB | ||
250 MHz | ≥dB | ||
Mechanické vlastnosti | |||
Pracovná teplota | °C | -20...+70 | |
Installation temperature | °C | -30...+50 | |
Minimum bending radius for indoor installation | Diameter | >8 |