Detaily
NETSET cables are compliant with the Construction Products Regulation (CPR) and EN 50575 harmonized European standard that specifies reaction to fire performance requirements, test and assessment methods for electric cables used for the supply of electricity and for control and communication purposes, which are intended for use in construction works and subject to performance requirements on reaction to fire.
The NETSET S/FTP 7 E1626 cable has been tested in a FORCE Certification Notified Body no. 0200 and awarded a Cca -s1a, d1, a1 fire performance rating.
The CAT 7 NETSET S/FTP shielded cable is a high-quality cable designed for professional indoor data transmission systems. Made of braid and foil, the shielding allows to minimize crosstalk and interference with the external environment.
- highest-quality materials, strict technological discipline confirmed by a 15-year quality guarantee,
- parameters far exceeding the requirements for Category 7 twisted pair cables
- preliminary quality control of raw materials and thorough tests of the final product,
- meter markers,
- solid wires, 0.56 mm in diameter (23 AWG),
- wire insulation made of skin-foam-skin PE; diameter: 0.56 mm; colors: white-green/green, white-orange/orange, white-brown/brown, white-blue/blue,
- insulated, screened wires twisted in pairs,
- sheath made of LSZH, 7.6 mm external diameter,
- meter markers - length error less than 0.5%.
1 - white-blue / blue wire
2 - white-brown / brown wire
3 - white-green / green wire
4 - white-orange / orange wire
5 - drain wire
6 - rip-cord
7 - aluminum screen
8 - sheath
9 - screening braid
2 - white-brown / brown wire
3 - white-green / green wire
4 - white-orange / orange wire
5 - drain wire
6 - rip-cord
7 - aluminum screen
8 - sheath
9 - screening braid
The CAT 7 NETSET S/FTP shielded cable is manufactured in compliance with the following standards:
- General cat.7 requirements
- ISO/IEC 11801:2011 (Ed. 2.2)
- IEC 61156-5:2012 (Ed. 2.1)
- EN 50173-1:2011
- EN 50173-2:2007 A1:2010
- EN 50288-10-1:2012
- ANSI/TIA-568-C.2:2009
- Fire performance
- Cca classification
- EN 50575:2014 including amendment A1:2016
The cable comes with a 15-year warranty.
The manufacturer guarantees the stability of parameters for at least 15 years, on the condition that the cable is packed, transported, installed, and used according to adequate European standards (among others E-79100 and EN 50174-1), within the permissible environmental conditions.
The CAT 7 NETSET S/FTP cable (E1626) is designed to work in temperatures from -20 oC to +50 oC, and can be installed between 0 oC and +50 oC. The bend radius should be equal or greater than 8 times the external diameter.
Test results
- Return Loss
Frequency [MHz] | Result [>dB] |
1 | 20 |
4 | 23 |
8 | 24.5 |
10 | 25 |
16 | 25 |
20 | 25 |
25 | 24.3 |
31.25 | 23.6 |
62.5 | 21.5 |
100 | 20.1 |
200 | 18 |
250 | 17.3 |
300 | 17.3 |
600 | 17.3 |
- Attenuation
Frequency [MHz] | Result [dB/100m] |
1 | - |
4 | 3.74 |
8 | 5.24 |
10 | 5.86 |
16 | 7.41 |
20 | 8.29 |
25 | 9.29 |
31.25 | 10.41 |
62.5 | 14.88 |
100 | 19.02 |
200 | 27.47 |
250 | 30.97 |
300 | 34.19 |
600 | 50.10 |
- NEXT
Frequency[MHz] | Result [>dB] |
1 | 78 |
4 | 78 |
8 | 78 |
10 | 78 |
16 | 78 |
20 | 78 |
25 | 78 |
31.25 | 78 |
62.5 | 75.5 |
100 | 72.4 |
200 | 67.9 |
250 | 66.4 |
300 | 65.2 |
600 | 60.7 |
- PSNEXT
Frequency [MHz] | Result [>dB] |
1 | 75 |
4 | 75 |
8 | 75 |
10 | 75 |
16 | 75 |
20 | 75 |
25 | 75 |
31.25 | 75 |
62.5 | 72.5 |
100 | 69.4 |
200 | 64.9 |
250 | 63.4 |
300 | 62.2 |
600 | 57.7 |
- ELFEXT
Frequency [MHz] | Result [>dB] |
1 | 78 |
4 | 78 |
8 | 75.9 |
10 | 74 |
16 | 69.9 |
20 | 68 |
25 | 66 |
31.25 | 64.1 |
62.5 | 58.1 |
100 | 54 |
200 | 48 |
250 | 46 |
300 | 44.5 |
600 | 38.4 |
- PSELFEXT
Frequency [MHz] | Result [>dB] |
1 | 75 |
4 | 75 |
8 | 72.9 |
10 | 71 |
16 | 66.9 |
20 | 65 |
25 | 63 |
31.25 | 61.1 |
62.5 | 55.1 |
100 | 51 |
200 | 45 |
250 | 43 |
300 | 41.5 |
600 | 35.4 |
Technické dáta
Name | NETSET S/FTP cat. 7 | ||
Product type | |||
Manufacturer | Dipol | ||
Brand | NETSET | ||
Cable type | S/FTP | ||
Aplikácie | |||
Category | 7 | ||
Cable length | m | 500 | |
CPR class | Cca-s1a,d1,a1 | ||
Fyzikálne vlastnosti | |||
Conductor | Material | Cooper | |
Diameter | mm | 0,560 | |
Conductor insulation | Material | PE | |
Diameter | mm | 1,33 | |
Twisted pairs | colors | white-brown/brown, white-blue/blue, white-orange/orange, white-green/green | |
Twisted pair shield | Material | Al/Mylar | |
Conductor shield | Material | Al/Mylar | |
sheath | Diameter | mm | 7,6 |
thickness | mm | 0,55 | |
Color | RAL7032 (gray) | ||
Gel filled | No | ||
Carrier cable | No | ||
Rip-cord | Yes | ||
Spline | No | ||
Length marker print error | <0.5 | ||
Elektrické parametre | |||
Impedance | Ohm | 100 | |
Nominal Velocity of Propagation NVP | 74 | ||
Delay skew | ns/100 m | <45 | |
Asymmetry in capacitance of transmission paths to the ground | pF/100 m | 330 | |
DC resistance | Ohm/100 m | 9,38 | |
Resistance asymmetry | <2 | ||
Return Loss | 1 MHz | ≥dB | 20 |
4 MHz | ≥dB | 23 | |
8 MHz | ≥dB | 24,5 | |
10 MHz | ≥dB | 25 | |
16 MHz | ≥dB | 25 | |
20 MHz | ≥dB | 25 | |
25 MHz | ≥dB | 24,3 | |
31.25 MHz | ≥dB | 23,6 | |
62.5 MHz | ≥dB | 21,5 | |
100 MHz | ≥dB | 20,1 | |
200 MHz | ≥dB | 18 | |
250 MHz | ≥dB | 17,3 | |
300 MHz | ≥dB | 17,3 | |
600 MHz | ≥dB | 17,3 | |
Loss | 4 MHz | ≤dB | 3,78 |
8 MHz | ≤dB | 5,24 | |
10 MHz | ≤dB | 5,86 | |
16 MHz | ≤dB | 7,41 | |
20 MHz | ≤dB | 8,29 | |
25 MHz | ≤dB | 9,29 | |
31.25 MHz | ≤dB | 10,41 | |
62.5 MHz | ≤dB | 14,88 | |
100 MHz | ≤dB | 19,02 | |
200 MHz | ≤dB | 27,47 | |
250 MHz | ≤dB | 30,97 | |
300 MHz | ≤dB | 34,19 | |
600 MHz | ≤dB | 50,1 | |
NEXT (near-end crosstalk) | 1 MHz | ≤dB | 78 |
4 MHz | ≤dB | 78 | |
8 MHz | ≤dB | 78 | |
10 MHz | ≤dB | 78 | |
16 MHz | ≤dB | 78 | |
20 MHz | ≤dB | 78 | |
25 MHz | ≤dB | 78 | |
31.25 MHz | ≤dB | 78 | |
62.5 MHz | ≤dB | 75,5 | |
100 MHz | ≤dB | 72,4 | |
200 MHz | ≤dB | 67,9 | |
250 MHz | ≤dB | 66,4 | |
300 MHz | ≤dB | 65,2 | |
600 MHz | ≤dB | 60,7 | |
PSNEXT (power sum near-end crosstalk) | 1 MHz | ≥dB | 75 |
4 MHz | ≥dB | 75 | |
8 MHz | ≥dB | 75 | |
10 MHz | ≥dB | 75 | |
16 MHz | ≥dB | 75 | |
20 MHz | ≥dB | 75 | |
25 MHz | ≥dB | 75 | |
31.25 MHz | ≥dB | 75 | |
62.5 MHz | ≥dB | 72,5 | |
100 MHz | ≥dB | 69,4 | |
200 MHz | ≥dB | 64,9 | |
250 MHz | ≥dB | 63,4 | |
300 MHz | ≥dB | 62,2 | |
600 MHz | ≥dB | 57,7 | |
ELFEXT | 1 MHz | ≥dB | 78 |
4 MHz | ≥dB | 78 | |
8 MHz | ≥dB | 75,9 | |
10 MHz | ≥dB | 74 | |
16 MHz | ≥dB | 69,9 | |
20 MHz | ≥dB | 68 | |
31.25 MHz | ≥dB | 64,1 | |
62.5 MHz | ≥dB | 58,1 | |
100 MHz | ≥dB | 54 | |
200 MHz | ≥dB | 48 | |
250 MHz | ≥dB | 46 | |
300 MHz | ≥dB | 44,5 | |
600 MHz | ≥dB | 38,4 | |
PSELFEXT (power sum far-end crosstalk) | 1 MHz | ≥dB | 75 |
4 MHz | ≥dB | 75 | |
8 MHz | ≥dB | 72,9 | |
10 MHz | ≥dB | 71 | |
16 MHz | ≥dB | 66,9 | |
20 MHz | ≥dB | 65 | |
25 MHz | ≥dB | 63 | |
31.25 MHz | ≥dB | 61,1 | |
62.5 MHz | ≥dB | 55,1 | |
100 MHz | ≥dB | 51 | |
200 MHz | ≥dB | 45 | |
250 MHz | ≥dB | 43 | |
300 MHz | ≥dB | 41,5 | |
600 MHz | ≥dB | 35,4 | |
Mechanické vlastnosti | |||
Pracovná teplota | °C | -20...+70 | |
Installation temperature | °C | 0...+50 | |
Minimum bending radius for indoor installation | Diameter | >8 | |
Packaging | |||
Spool | Diameter | mm | 380 |
Width | mm | 385 | |
Weight | kg | 29 | |
priemer otvoru cievky | mm | 33 |