Kód tovaru: G74018
Tovar bol stiahnutý z ponuky

Podpora

Máš otázky alebo úvahy?

Detaily

DS-KH6320-WTE2 is a modern touch monitor designed to control Hikvision second-generation video intercom systems in the 2-Wire standard. It allows direct audio/video conversation with people at the door station and intercom communication between other monitors installed in the system. Thanks to this, residents can communicate with each other free of charge. The system is operated using a clear and intuitive graphic interface.
The monitor allows users to connect and preview images from IP cameras and door stations at any time. They can also capture photos during video calls and record a short message in case the resident missed a call. The built-in Wi-Fi 2.4 GHz module working in b/g/n standard enables wireless communication. The panel is powered with 24 VDC via the 2-Wire bus from the G74823 DS-KAD706 distributor. After connecting the distributor to the network via a LAN port, each supported device gets its IP address and is visible and configurable just like other IP video door phones.
Key features:
  • 7"color TFT LCD touch screen with resolution of 1024 x 600 px pixels,
  • indoor station controlled with UI v2.0 GUI,
  • built-in microphone and speaker,
  • monitoring video from door/gate station and other IP cameras (Hikvision),
  • clear sound thanks to echo and noise cancellation,
  • configuration with iVMS-4200 (v3) app,
  • management and control via iVMS-4200 app and Hik-Connect cloud service,
  • additional functions:intercom, saving images and voice messages,
  • capturing photos during the owner's absence,
  • built-in memory: 128 MB,
  • support for microSD cards up to 32GB,
  • built-in Wi-Fi module (2.4 GHz, IEEE 802.11 b/g/n),
  • 8 alarm inputs,
  • 2 relay outputs,
  • power and communication via G74823 DS-KAD706 – 24 VDC,
  • 2nd-generation IP video phone/intercom functionality.
NOTE!
The current version of the software is available
here.
The device is compatible with the 2-Wire system
which does not have in its designation name the letter "Y"
.
2-Wire system
There is often a need to replace the existing intercom (video) system with a newer one, offering greater functionality and quality. This type of modernization may require replacement of the cabling, e.g. with twisted pair cables for IP systems. The Hikvision video intercom working in 2-Wire standard offers all the possibilities of an IP system. The construction of a small system consists in connecting the main unit (door station) to the G74823 DS-KAD706 distributor and monitor(s) by means of the 2-Wire bus. The 2-Wire bus allows for both powering the devices and establishing communication. The G74823 DS-KAD706 distributor also enables further expansion and connection of the system to a LAN.
Hikvision 2-wire video intercom
Second generation 2-wire Hikvision IP video intercom systems are characterized by aesthetic appearance and high functionality. The door station has a modular structure which means that its elements can be selected depending on the installation requirements. It always includes a main module which enables powering of other necessary modules and optional expansion modules (max. 8). Both the main module of IP video intercom G73652 DS-KD8003-IME1/EU and the main module G73644 DS-KD8003-IME2 of 2-wire system allow for further extension with the use of respective expansion modules.
  • DS-KD8003-IME1/EU G73652 - main module of IP video intercom,
  • DS-KD8003-IME2 G73644 - main module of 2-Wire system,
  • DS-KD-E G73660 - card reader module (EM 125 kHz),
  • DS-KD-M G73662 - card reader module (Mifare 13.56 MHz),
  • DS-KD-IN G73664 - indicator module,
  • DS-KD-KK G73666 - name tag module with 6 buttons,
  • DS-KD-KP G73668 - numerical keypad module,
  • DS-KD-DIS G73670 - display module,
  • DS-KD-BK - blank module.
The door/gate station can be expanded with the use of flush or surface frames for embedding 1, 2 or 3 module(s) – (DS-KD-XXX), which allows for easy extension of the system depending on the requirements.
Simple alarm system functions
The functionality and security of the system built on the basis of DS-KH6320-WTE1/EU monitors can be increased by employing its functions of an alarm control panel. The monitor is equipped with 8 inputs for connecting sensors and 2 alarm outputs. Information about the violation of a given sensor can be transferred to the Hik-Connect mobile application. The ability to set zones and select several arming modes allows users to customize the system to suit their needs. The connected sensors/detectors can work in NO or NC modes and the inputs of the monitor can react immediately, with a delay, or according to a schedule.
System configuration and management
The configuration of the IP video door system can be performed with the use of the iVMS 4200 (v3) client software. The iVMS 4200 client software enables users of HIKVISION devices, such as IP DVRs/NVRs, TurboHD DVRs, video door systems to manage them in IP networks. The software allows for remote configuration and management of the devices. In the case of operating video intercom systems, it is possible to open doors remotely, record the video from the camera, take snapshots, make voice calls to the subscriber monitor(s). The application can also send text notifications with snapshots to the subscriber(s). Any information can be transferred easily and quickly, for example the user of the door station can directly call the monitoring center (iVMS-4200) and establish connection with the security staff.
Login page of the iVMS-4200 (v3) client software

Access via mobile devices
Hikvision devices can be operated via mobile phones with Android or iOS using the dedicated Hik-Connect mobile application. It can be used for remote live viewing from DVRs, NVRs, IP cameras, video intercoms over the WiFi, 2G or 3G and to view saved recordings. Operating video intercoms with the application provides also remote opening of the electric strike, receiving notifications and transferring calls from the entrance panel to the phone in the absence of the subscriber. The application supports connectivity over IP and a P2P cloud. Hik-Connect is also the name of the cloud service that provides access to devices in the absence of an external IP address.

Technické dáta

Model DS-KH6320-WTE2
Manufacturer Hikvision
System
Product type
Product generation II
Housing material
Color
Parameters
Memory Mb 128
Flash Mb 32
Display " 7, color TFT
Operation
resolution px 1024 × 600
Kompresia obrazu H.264
Built-in speaker/microphone
Two-way audio
Audio compression G.711U
Audio bitrate kbps 64
Audio quality
relay outputs 2 (NO)
Alarm inputs 8
Wi-Fi 802.11 b/g/n, 2,4 GHz
microSD slot Yes, max 32 GB
Network interface 2-Wire
Other interfaces RS-485
Protocols TCP/IP, SIP, RTSP
Power supply DC V 24 (2-Wire)
Power consumption W max. 6
Pracovná teplota °C -10...55
Humidity 10...90
Dimensions mm 200 × 140 × 15
Weight kg 0,64