Kód tovaru: J2840
Cena s DPH Zľava Počet Platnosť
€180.11 0 % od 1 ks.
K dispozícii


3-ročná záruka.


Máš otázky alebo úvahy?


The xCOAX3-SET is a set of active converters for Ethernet data transmission and PoE power supply via coaxial cable which is often used in analog monitoring. The devices allow the installation of PoE IP cameras in places where the replacement of the existing coaxial cabling is impossible or uneconomical. The xCOAX3-SW module is powered from any PoE switch (RJ45 port) and through the coaxial cable, it enables bidirectional network communication and powering the xCOAX3-CAM module. The maximum length of the coaxial cable is 500m. A camera or other PoE receiver can be connected to the RJ45 port of the xCOAX-CAM module at the end of the line.
The BOX version (angled BNC connector arrangement) makes it easy to mount the xCOAX3-CAM-BOX module in a camera base or other installation box.
The polycarbonate casing is a well-thought-out solution ensuring isolation and the smallest possible size of the device. The compact size gives more installation options.
Key features:
  • Transmission range over coaxial cable up to 500 m at 100 Mbps,
  • Noise immunity and watchdog function in COAX path,
  • Power supply from switch PoE 802.3at/af or PoE PASSIVE,
  • Power supply to receiver PoE 802. 3at/af or PoE PASSIVE receivers
  • up to 30W total power in the whole power path,
  • Very low power consumption – 1,35 W,
  • Compact modules,
  • Clear, optical indication of power and data transmission status,
  • Easy and quick startup without configuration of parameters.

Technické dáta

Product type Ethernet to coaxial cable converter
Brand ATTE
Input parameters number 1
connector type RJ-45
PoE pairs 1.2 (V+); 3.6 (V-), 4.5 (V+); 7.8 (V-)
Output parameters number 1
connector type RJ-45
RJ-45 connector voltage V 802.3af, 802.3at, POE pairs: 4.5 (V+); 7.8 (V-), Passive
Pracovná teplota °C -25 ... +65
Dimensions mm 90 × 35 × 21.5