Podpora

Máš otázky alebo úvahy?

Detaily

Distinguishing features
  • bispektral camera: thermal imaging sensor and image sensor operating in visible light spectrum in one device,
  • thermal imaging sensor resolution: 160 x 120 px,
  • thermal imaging sensor focal length: 3.1 mm
  • image sensor resolution: 1920 x 1080 px,
  • focal length: 4 mm,
  • combining of images: image on image, image in image,
  • VCA analytics based on GPU and deep learning algorithm,
  • VCA functions: line crossing, intrusion detection, zone entry and zone exit detection,
  • temperature measurements,
  • fire detection,
  • H.265+/H.265/H.264+/H.264/MJPEG video compression,
  • even lighting by EXIR 2.0 IR illuminator: IR range up to 15 m,
  • supports for microSD cards up to 256 GB,
  • image enhancement functions: 3D-DNR, WDR (120dB), BLC,
  • thermal image processing: AGC, DDE, 3D-DNR, NETD < 40 mK (25°) @ f1.1,
  • support for two streams,
  • ROIs: 4,
  • additional connectors: alarm input/output, audio, BNC (CVBS),
  • access via Hik-Connect,
  • IP protection level: IP67,
  • power: 12 VDC or PoE (802.3af).
DS-2TD1217-3/V1 is a bispectral Hikvision IP camera that combines the advantages of traditional video monitoring and thermal imaging. The functions are preformed by two image sensors, one of them (visible light) is CMOS with image resolution of 1920 x 1080 px, the second detects far-infrared radiation with resolution of 160 x 120 px. The camera can combine the both images into one with good quality and a wealth of information. VCA image analytics based on the built-in GPU graphics processor and a deep learning algorithm essentially reduce the number of false alarms. Temperature measurements and fire detection functions allow for using the camera in advanced multi-factor protection systems.
The slot for a microSD card accepts cards up to 256 GB. The IP67 rated housing protects the electronics of the camera against the effects of unfavorable weather conditions. The camera can be powered traditionally with 12 VDC or with the use of PoE option (802.3af compliant).
VCA analytics, temperature measurement, fire detection
The DS-TD1703 / V1 camera provides VCA image analytics that is based on the built-in GPU graphics processor and deep learning algorithm. This combination allows for efficient use and minimizing the number of false alarms. There are 4 types of analysis available: line crossing, intrusion detection, zone entry and zone exit detection. A maximum of 8 rules can be run at the same time. Temperature measurement is possible in the range from -20°C to +150°C with an accuracy of +/- 8°C. There are 3 types of measurement: point, area, line. A maximum of 21 rules can be set, consisting of 10 points, 10 areas and 1 line. Dynamic fire detection of up to 10 fire source points possible.
Principle of operation and advantages of thermal imaging
A thermal imaging camera is a perfect complement to visual monitoring in the reflected visible light and near-infrared radiation. Analog or IP cameras used in video monitoring enable correct identification and recognition of people during the day and at night with the use of infrared illuminators. A thermal imaging camera does not need any lighting for proper operation. Its operating principle is completely different than in the case of traditional cameras. Any body with a temperature above absolute zero (0 K = -273.15°C) emits infrared radiation. Due to the existing relationship between the temperature and radiation intensity, a thermal imaging camera, receiving the far-infrared radiation, calculates temperature values based on the wavelengths of the radiation. So, a thermal imaging camera can show the temperature distribution on the surface of the examined body and measure the temperature values.
Some applications of thermal imaging cameras
  • intrusion detection even in bad weather conditions (rain, snow, fog, dust),
  • inspection of electric lines/cables, transformer and switching stations (detection of improper contacts, overloaded fuses, cables and transmission lines, overheated transformers),
  • tank level monitoring - the temperature distribution shown on the image from a thermal camera can be used to estimate the fill level of closed containers,
  • machinery - detection of overloaded elements, bad cooling, increased friction; diagnostics of engines, bearings, gears, belts, shafts, gearboxes, pumps, compressors, blowers etc.,
  • perimeter control with the VCA,
  • support for traditional video surveillance systems,
  • landfills,
  • border crossings,
  • prisons,
  • factories,
  • fire detection,
  • warehouses, stores, etc.
Detection ranges
The following tables illustrate the detection ranges with the smart function and the ranges of detection, recognition and identification of a person or vehicle. The tables are given for reference only and the ranges may vary depending on the camera model.
Detection ranges with the smart function
VCA
Vehicles
1.4 x 4 m
VCA
People
1.8 x 0.5 m
Temp. measur. Objects
2 x 2 m
Temp. measur. Objects
1 x 1 m
Fire
detection

Objects
2 x 2 m
Fire
detection

Objects
1 x 1 m
63 m 21 m 66 m 33 m 180 m 90 m
Ranges of detection, recognition and identification of people/vehicles
Detection
Vehicles
1.4 x 4 m
Detection
People
1.8 x 0,5 m
Recognition Vehicles
1.4 x 4 m
Recognition People
1.8 x 0.5 m
Identification
Vehicles
1.4 x 4 m
Identification People
1.8 x 0.5 m
280 m 91 m 70 m 23 m 35 m 11 m
DeepinView series
DeepinView is a new series of IP cameras running an artificial intelligence algorithm. Built-in GPU graphics processor and advanced analytical algorithms ensure high accuracy. Among the available video analytics features, the most important functions are face detection and recognition, number plate identification (ANPR), people counting, line crossing, intrusion detection, detection of entry and exit to/from a zone (perimeter protection based on detection and classification of targets). Cameras from this series are perfect for implementing the most advanced video surveillance projects.
Specifications:
Name HIKVISION DS-2TD1217-3/V1
Code K01845
Standard IP, bispektral
(thermal imaging + optical)
Housing Ceiling type (dome)
Thermal imaging module
Sensor type Microbolometric uncooled (VOx)
Effective pixels
160 x 120
Output resolution
320 x 240 @ 25 fps
Pixel size
17 µm
Spectral sensitivity
8 - 14 µm
Thermal distinguishability (NETD) < 40 mK (25°C) @  f1.1
Focal length
3.1 mm
Spatial resolution IFOV (MRAD) 5.48 mrad
Minimum focusing distance
0.2 m
F-number F1.1
Optical module
Resolution 1920 x 1080
Image sensor
1/2.7" Progressive Scan CMOS
Sensitivity 0.002 lux @ (F1.2, AGC ON),
0.0002 lux @ (F1.2, AGC ON) with IR
Shutter speed 1 s to 1/100000 s
Focal length 4 mm
Viewing angles
87° x 46.2° (H x V)
WDR 120 dB
ICR filter
Yes
Other parameters and functions
Combining of images
Image fusion and overlay
VCA analytics
4 functions ( line crossing, intrusion detection, zone entry and zone exit detection)
Max. number of VCA rules
8
Temperature measurements
3 types (point, zone, line)
21 rules (10 points, 10 zones, 1 line)
Temperature measurement range
-20°C to +150°C (-4°F to +302°F)
Temp. measurement accuracy
+/-8°C (+/-14.4°F)
Fire detection
Dynamic detection of fire source
(up to 10 detection points)
IR illuminator range
up to 15 m
IR angle and intensity
Auto-adjustment
Video compression H.265+/H.265/H.264+/H.264
Audio compression
G.711u/G.711a/G.722.1/MP2L2/G726/PCM
Protocols TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, UDP, Bonjour
Live preview Max. 20 users
Audio IN/OUT
YES, Cinch 3.5 mm
Alarm input
1: (0-5 V/DC)
Alarm output 1: relay
microSD card slot
YES (max. 256 GB)
Network interface RJ-45 10/100 Base-T
Additional interface
RS-485
Additional output
CVBS (BNC,75 Ω)
Standards ONVIF (S, G profiles), ISAPI
Housing material
Metal
IP protection level
IP67
Power 12 VDC ± 25%, PoE 802.3af 
Power consumption
Max. 8 W;  PoE: 8.5 W
Operating temperature range
-30°C ...+60°C
Dimensions Φ138 × 138 x  123 mm
Weight 1.2 kg

 

H.265+/H.265 video compression
The camera implements several video compression methods, H.265+, H.265, H.264+, H.264, MJPEG. Compared with H.264, H.265 can reduce by half the data stream, which translates into proportional savings of the disk space or into extended data retention time. H.265+ and H.264+ are Hikvision standards based on the original systems and optimized for CCTV applications. They further minimize the streams in typical video surveillance scenarios. With the advanced video compression algorithms, the camera can be used in IP CCTV systems based on modern NVRs implementing H.265 standard (the DS-76/77/96NI-I/K series supports H.265+, H.265, H.264+, H.264). Of course, the camera can also operate with older models supporting H.264 (the DS-76/77NI-E series supports H.264+, H.264).
IR illuminator in EXIR 2.0 technology
The built-in powerful IR illuminator has a range of up to 50 m. The illuminator based on the newest Exir 2.0 light-emitting technology has ca. 30% higher efficiency compared with traditional IR LED arrays. Additionally, the IR light in the form of a rectangle fits the camera's field of view. This further improves the efficiency of the lighting and eliminates the excessive light intensity in the central part of the scene, typical for majority of IR illuminators. Exir 2.0 illuminators ensure much better luminance uniformity, including corners of the scene, at the same time reducing light pollution in the surrounding environment. Compared with the previous version, Exir 2.0 illuminators feature longer service life thanks to optimized heat dissipation, up to 20,000 hours.
Convenient client applications
The iVMS 4200 client software enables users of HIKVISION devices to manage them in IP networks. The software allows for configuration and management of NVRs/DVRs, IP and analog cameras (in hybrid systems). The iVMS 4200 utility can remotely manage up to 256 devices, with the use of up to 4 monitors. One monitor can display up images from up to 64 cameras. Aside from system configuration and live monitoring, the utility can be used for remote playback, notifying, two-way audio transmission, creating multi-level e-maps.
Hik-Connect is a mobile application, intended for smartphones running Android or iOS operating systems. It can be used for remote live viewing of images from DVRs, NVRs, network cameras via Wi-Fi, 2G or 3G networks, and for playing back recorded video files. The application connects with the devices by IP addresses and/or through the P2P cloud.
Working in the cloud
Hik-Connect is also a network service for Hikvison devices. The service is based on data processing in the cloud and integrates the following functions:

  • Remote access through the cloud - it allows access to the device without having an external IP address and when simplicity is the most important thing. Only the basic configuration of the network is required. The application on a PC or smartphone connects with the device via P2P cloud service,
  • DDNS server - DDNS assigns a fixed domain name to dynamically changing IP addresses (Dynamic DNS). This feature is useful when the ISP does not provide users with a fixed IP address. The condition for using DDNS is having a public IP address and providing access from the external network to the appropriate ports of the NVR (server and http, by default 8000 and 80). The connection is possible via a web browser, client application on a PC and on smartphones.
LAN tool for organizing Hikvision IP CCTV systems
SADP (Search Active Device Protocol) is a free and simple to use utility for searching Hikvision IP cameras and Hikvision DVRs/NVRs in the local network. The network device search tool can also be used for modification of network parameters of the Hikvision devices, including the change of passwords or recovery of default passwords. Detailed information on the software and its use is contained in the SADP application - LAN tool for organizing CCTV systems based on Hikvision devices article.

Technické dáta

Model DS-2TD1217-3/V1
Product type
Brand Hikvision
Series DeepinView
Aplikácie
Housing ,
Adjustment 3-axis
Color
Reset button Yes
Sensor type
CMOS
Effective pixels px 160 × 120
Image output resolution px 320 × 240
Pixel spacing μm 17
Spectral range μm 8-14
Thermal distinguishability (NETD) MK <40 (25°C), F#=1.1
Focal length mm 3,1
Viewing angle horizontal ° 50
Spatial resolution IFOV mrad 5,48
Minimum focusing distance m 0,2
Aperture F1,1
Sensor size 1/2.7
Sensitivity (color mode) lx 0.002 @ (F1,.2, AGC ON)
Shutter speed S 1/3 – 1/100000
Lens type Fixed
Focal length mm 4
Viewing angle horizontal ° 87
Main stream max. resolution MP 2
max. resolution px 1920 × 1080
max. resolution fps 25
WDR dB 120
Day/night mode Yes (ICR)
Illuminator
IR Range m 15
wavelength nm 850
illuminator type EXIR
Kompresia obrazu
Compression methods H.265+, H.265, H.264+, H.264
No. of streams 2
Data recording
microSD slot Yes
Recording types MicroSD (max. 256 GB)
Audio
Podpora zvuku Yes
Compression method G.711, G.722.1, G.726, MP2L2, PCM
Intelligent image analysis (Deep Learning algorithm)
Other incidents , ,
Temperature measurement 3 types (point, area, line), 21 rules (10 points, 10 areas, 1 line)
Measurement range °C -20...+150
Measurement accuracy °C +/-8
Fire detection
Image fusion Yes
Image overlay (picture-in-picture) Yes
Network
Protocols TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1 × , QoS, Bonjour
Standards API, ISAPI, SDK
Live view 20 simultaneous channels
Users up to 32 (3 access levels: Administrator, Operator, User)
Client applications iVMS-4200, Hik-Central
Supported browsers Firefox 30,0-51, Safari 5.02+
Interfaces
Ethernet 1 × RJ-45 10/100 MBps
BNC (CVBS) Yes
RS-485 Yes
Alarm in/out Yes
Alarm 1 (0-5 V/DC)
1 (relay)
Audio Yes
Yes
Others
Power supply PoE V 42.5-57 (802.3at)
PoE A 0.14 – 0.22
PoE W
DC V 12
DC A 0,7
DC W max. 8
Housing material
Protection rating IP67
Pracovná teplota °C -30...+60
Humidity 95 or less (non-condensing)
Camera dimensions mm 134 × 124 × 108
Weight kg 1,2