Slovenský
Polski
English
Česky
Deutsch
Irish
Magyar
Português
Română
Tovar bol stiahnutý z ponuky
Alternatívy
Podpora
Detaily
The PC-511D patch cord consists of two 3-meter long single-mode cables terminated on both sides with SC connectors. SC connectors are currently the most popular optical coupling elements due to simple matching (push-pull coupling with a snap), rectangular cross-section allowing dense packing of the connectors on the panel, and plastic construction (of course outside the ferrule).
The single-mode optical fiber with low water peak used in the patch cords is compliant with ITU-T G.652.D standard. It provides full compatibility and ability to perform quality splices with existing fiber-optic networks. The average attenuation of the fiber is about 0.4 dB/km for 1310 nm, and 0.25 dB/km for 1550 nm. The optical fiber is reinforced by aramid fibers (Kevlar) and covered with PVC sheath.
The optical fibers compliant with ITU-T G.652.D are now among the best standard single-mode fibers on the market. Before introduction of the G.652.D recommendations, optical systems could use one of the three transmission windows with lower attenuation (I: 850 nm, II: 1310 nm, III: 1550 nm). Systems based on optical fibers with reduced peak water can work in the whole band from 1280 nm to 1650 nm.
Key features
- connectors: 2x SC - 2x SC
- two single-mode fibers (G.652D)
- length: 3 m
- low loss
Technické dáta
| Product type | Patchcord | ||
| type | Duplex | ||
| Fiber type | |||
| Connector type A | SC/UPC | ||
| Connector type B | SC/UPC | ||
| Connectors | SC/UPC – SC/UPC | ||
| Fiber standard | G.652D | ||
| Brand | ULTIMODE | ||
| Name | PC-511D | ||
| Length | m | 3 | |
| Insertion loss (IL) | A connector | dB | < 0.25 (A1, A2) |
| B connector | dB | < 0.25 (B1, B2) | |