Front view

Back view

The accessories included

Hikvision iDS-7208HUHI-M2/S/4A+8/4ALM DVR is a modern device for recording video from high resolution cameras (up to 5 MP). It has universal channels for video recording in HD-TVI AHD, HD-CVI, CVBS and IP standards. The maximum recording resolution is 8 MP at 8 fps. Other supported resolutions: 5 MP at 12 fps, 3 Mpix at 18 fps and 1080p/720p/VGA/WD1/4CIF/CIF recording at 25 fps

By default, the DVR supports 8 analog cameras (HD-TVI, AHD, or CVBS signals) and 2 IP cameras (up to 8 MP). If an analog channel is unused, disabling it in the menu adds support for a new IP camera. When all analog channels are disabled, 10 IP cameras can be connected.

By activating the Enhanced IP mode, the number of supported IP channels is increased. 8 IP cameras up to 4 MP (max. 16 when all analog channels are switched off) are supported, but smart event support on analog channels is disabled and resolution on HDMI/VGA video outputs is limited to 1080p. It can be started only while having a direct access to the DVR menu.

The DVR can record one or two video streams (primary and/or secondary) from each channel. The video can be compressed using the H.265 method. Compared with its predecessor (H.264), H.265 can reduce the data stream by half, which translates into proportional disk space savings and extended data retention time. H.265+ can further minimize the streams in typical video surveillance scenarios.

Each channel can be independently set up for motion detection and VQD (video quality detection, which e.g. can send e-mails or notifications to alert the user whenever the image is out of focus, too bright, or discolored).
Two analog channels can be selected to detect virtual line crossing (and its direction) and intrusion within a rectangular area.
Users can also opt for the Enhanced VCA mode, in which virtual line crossing and intrusion detection are available in four channels. If the mode is switched on, the CVBS output will be disabled.

The iVMS 4200 client software enables users to manage Hikvision devices in IP networks. The software enables the configuration and management of NVRs/DVRs, IP and analog cameras in hybrid systems. The iVMS 4200 utility can remotely manage up to 256 devices on up to 4 monitors. One monitor can display images from up to 64 cameras. Aside from system configuration and live monitoring, the utility can be used for remote playback, notifications, two-way audio transmission, and multi-level e-maps.

The control panel of the iVMS-4200 application

Hik-Connect is a mobile application intended for smartphones with the Android and iOS operating systems. It can be used for the remote live viewing of footage from DVRs, NVRs, network cameras via Wi-Fi, 2G, or 3G networks, as well as the playback of recorded video files. The application connects to the devices by IP addresses and/or through the P2P cloud service.

Hik-Connect is also the name of a network service intended for Hikvison devices. The service relies on P2P cloud computing for remote viewing via smartphones and tablets, and provides extensive monitoring and basic configuration options: live viewing (multiple channels), PTZ control, digital zoom, acoustic monitoring, playback of archival video, and alarm notifications (intrusion, line crossing, etc.).

Main features of the Hik-Connect service:

Various applications intended for the installers and operators/users of video surveillance systems based on Hikvision devices are described in our library.

The main window of the SADP software

SADP (Search Active Device Protocol) is a free, easy-to-use utility designed to search for Hikvision IP cameras and DVRs/NVRs in the local network. The network device search tool can also be used to modify device network parameters, e.g. to change or recover default passwords. Detailed information on the software, its use and password recovery (par. 8) can be found in the following article: SADP application - LAN tool for organizing CCTV systems based on Hikvision devices.