Predstavujeme vám revolučný rad HIKVISION produktov: HD-TVI TURBO HD DVR a kamery. Bezprecedentná kombinácia megapixelového rozlíšenia a jednoduchosť inštalácie analógových systémov.
Podpora
Detaily
Key features:
- Recording of HD-TVI video with 4 MP Lite (1280 x 1440) or 1080p resolution at 15 fps; 720p and lower resolutions at 25 fps
- Recording of HD-CVI, AHD video with 2 MP resolution at 15 fps
- Channels 1, 2, 3, and 4 can support 3 MP cameras at 15 fps
- 1080p lite recording mode: 960x1080 at 25 fps
- Support for 24 HD-TVI, AHD, HD-CVI or CVBS cameras and 8 IP cameras (max. 6 MP, Hikvision or Onvif-compliant)
- H265 and H265+ video compression
- Management via IE browser
- Channel 0 - possibility to monitor all cameras with minimum demand for network bandwidth
- Parallel operation of HDMI1 and VGA outputs up to 1920 x 1080 @ 60 Hz and independent HDMI2 output (4K @ 30 Hz / 2K @ 60 Hz)
- CVBS video output
- Searching recordings by alarm events
- VCA functionality
- Digital zooming during live monitoring and playback
- Synchronous playback from 16 channels
- Support for IPv4, IPv6,
- Monitoring the statuses of LAN, cameras, hard drives
- Support for POS.
Hikvision DS-7324HQHI-K4 is a 24-channel CCTV DVR capable of recording surveillance video provided in HD-TVI, HD-CVI, AHD, CVBS and IP standards. The 24 channels can record images from 4 MP Lite (1280 x 1440), 1080p or 720p cameras at 15 fps. In the case of channels 1, 2, 3 and 4, the maximum recording resolution is 3 MP @ 15 fps. For VGA / WD1 / 4CIF / CIF resolutions, the maximum frame rate is 25 fps. Additionally, the DVR can support up to 8 IP cameras (after switching off analog channels, the number of IP channels can be extended up to 32).
H.265 video compression
The DVR can record one or two video streams (primary and/or secondary) from each channel. The video can be compressed with the use H.265 method. Compared with the predecessor (H.264), H.265 can reduce by half the data stream, which translates into proportional savings of the disk space or extended data retention time. H.265+ can further minimize the streams in typical video surveillance scenarios.
Special recording modes
The recording can be performed in different modes: continuous, motion detection (with pre- and post-event recording), alarm (with pre- and post-event recording), or continuous recording with special parameters in the case of specific events. Each channel can be configured individually in this aspect. It is possible to increase the frame and bit rates, independently of the continuous recording settings. After the occurrence of an event (motion detection, camera tampering etc), the NVR automatically switches to the event-recording mode (usually with higher parameters). During the rest of the time the recording is carried out in the continuous mode. The increased parameters just before and after the event allow to play back every second of the period with high detail and smoothness, while the recordings between events may have a much lower performance, taking significantly less space on the storage media.
Intelligent image analysis
Four selected channels have the possibility of independent settings for intelligent image analysis (VCA). The image analysis includes detection of virtual boundary line trespass (including direction), and detection of intrusion to an area of a square shape. One channel allows for detection of quick change in a scene.
VQD (video quality diagnostic function) can e.g. send email or alarm message on a worsened focus, excessive brightness or discoloration.
VQD (video quality diagnostic function) can e.g. send email or alarm message on a worsened focus, excessive brightness or discoloration.
Refined client software
The iVMS 4200 client software enables users of HIKVISION devices to manage them in IP networks. The software allows for configuration and management of NVRs/DVRs, IP and analog cameras (in hybrid systems). The iVMS 4200 utility can remotely manage up to 256 devices, with the use of up to 4 monitors. Oner monitor can display up images from up to 64 cameras. Aside from system configuration and live monitoring, the utility can be used for remote playback, notifying, two-way audio transmission, creating multi-level e-maps.
Hik-Connect is a mobile application, intended for smartphones running Android or iOS operating systems. It can be used for remote live viewing of images from DVRs, NVRs, network cameras via Wi-Fi, 2G or 3G networks, and for playing back recorded video files. The application connects with the devices by IP addresses and/or through the P2P cloud.
Working in the cloud
Hik-Connect is also the name of network service intended for Hikvison devices. The service is based on data processing in the cloud and integrates the following functions:
- Remote access through the cloud
- DDNS server
It allows access to the device without having an external IP address and when simplicity is the most important thing. Only the basic configuration of the network is required. The application on a PC or smartphone connects with the device via P2P cloud service.
DDNS assigns a fixed domain name to dynamically changing IP addresses (Dynamic DNS). This feature is useful when the ISP does not provide users with a fixed IP address. The condition for using DDNS is having a public IP address and providing access from the external network to the appropriate ports of the NVR (server and http, by default 8000 and 80). The connection is possible via a web browser, client application on a PC and on smartphones.
Advanced applications for organizing and operating video surveillance systems
This article provides an overview of applications dedicated for installers and users of Hikvision-based video surveillance systems.
SADP (Search Active Device Protocol) is a free and simple to use utility for searching Hikvision IP cameras and Hikvision DVRs/NVRs in the local network. The network device search tool can also be used for modification of network parameters of the Hikvision devices, including the change of passwords or recovery of default passwords. Detailed information on the software and its use is contained in the SADP application - LAN tool for organizing CCTV systems based on Hikvision devices article.
Specifications:
Name/model | DS-7324HQHI-K4 | |
Code | M75620 | |
Video formats | HD-TVI, HD-CVI, AHD, CVBS, IP | |
Video inputs | 24 x BNC + 8 x IP channel | |
Video compression | H.265+/H.265/H.264+/H.264 | |
HDMI2 video output | 4K:3840×2160, 30 Hz 2K: 2560×1440, 60 Hz 1080p: 1920x1080 SXGA: 1280x1024 720p: 1280x720 XGA 1024x768 | |
HDMI1/VGA video output | 1080p: 1920 x 1080 and lower resolutions | |
BNC video output | 4CIF: 704 x 576 | |
Two-way audio (IN/OUT) | 1/1 (RCA) | |
Audio inputs | 4 x RCA | |
Alarm inputs / outputs | 16 / 4 | |
Alarms and exceptions | Motion detection, video loss, camera tampering | |
Live monitoring | 25 fps | |
Recording options | 5 MP | - |
3 MP | 15 fps (channels 1...4) | |
1080p | 15 fps | |
720p | 25 fps | |
WD1/4CIF | 25 fps | |
CIF | 25 fps | |
Video bit rate range (single channel) | 32 kbps - 4 Mbps | |
Audio bit rate | 64 kbps | |
HDD capacity & interface | 4x max 8 TB SATA HDD | |
S.M.A.R.T. monitoring tools | YES | |
NAS/SAN compatibility | YES (NAS) | |
External ports | 1x USB 3.0, 2x USB 2.0; RS-485; RS-232, RJ-45 (10M/100M/1000M Auto); keyboard (KB) | |
Secondary stream | WD1, 4CIF, CIF | |
Network protocols | TCP/IP; DHCP; DDNS; PPPoE; email; NTP; SNMP; UPnP, Hik-Connect, ONVIF | |
Software ports | Server - 8000 HTTP - 80 RTSP - 554 | |
Remote monitoring | Internet Explorer | |
PTZ protocols | Yes | |
Archiving | USB storage device, remote server | |
Power | 230 VAC | |
Power consumption | <45 W (without HDD) | |
Operating temperature | -10°C...55°C | |
Operating humidity | 10%...90% | |
Dimensions ( W x D x H ) | 440 x 390 x 70 mm | |
Weight | <7 kg |
Technické dáta
Model | DS-7324HQHI-K4 | ||
Product type | |||
Brand | Hikvision | ||
Series | TurboHD 4.0 | ||
Parameters | |||
Analog video inputs | 24 | ||
Maximum resolution | MP | 2 | |
Signals supported | multi-system (HD-TVI, HD-CVI, AHD, CVBS) | ||
default signal | HD-TVI | ||
exchangeable for IP | Yes 1:1 | ||
IP video inputs | number in standard mode | 16 | |
40 | |||
Recording | Video compression | H.265+/H.265/H.264+/H.264/MPEG4 | |
speed of other HD signals | 15 for 2 MP, 15 for 720p, 25 for WD1/4CIF | ||
bitrate of a single video channel | 32 kb/s – 6 MBps | ||
Audio compression | G.711U | ||
audio channel bitrate | 64 Kbps | ||
Max. resolution of video outputs | HDMI 1 | px | 1920 × 1080 |
HDMI 2 | px | 3840 × 2160 (4K) | |
VGA 1 | px | 1920 × 1080 | |
BNC | 704 × 576 (CVBS) | ||
Video output modes | Independent HDMI2, Parallel HDMI1/VGA1 | ||
Decoding | synchronous playback | 16 | |
HDD | number of SATA II interfaces | 4 | |
Number of eSATA interfaces | 1 | ||
max. capacity of each HDD | TB | 10 | |
Image analysis (conventional algorithm) | |||
Basic incidents | , , , , | ||
Advanced incidents | , , | ||
Interfaces | |||
USB | 2 | ||
1 | |||
Two-way audio | Yes | ||
Audio | Input | 4, RCA (2.0 Vp-p, 1 kOhm) | |
Output | 1, RCA (linear, 1 kOhm) | ||
Alarm inputs/outputs | Yes | ||
Alarm | Input | 16 | |
Output | 4 | ||
Serial interfaces | kB, RS-232, RS-485 | ||
Ethernet | 1 × RJ-45 10/100/1000 | ||
Others | |||
Applications | Hik-Connect, iVMS-4200 | ||
Archiving | USB, | ||
Network protocols | TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP™, HTTPS, ONVIF | ||
Power supply output | AC | V | 100 – 240 |
Power consumption (without HDD) | DC | W | <45 |
Pracovná teplota | °C | -10 ...+ 55 | |
Humidity | 90 or less (non-condensing) | ||
Dimensions (W × D × H) | mm | 440 × 390 × 70 | |
Rack mounting | Yes | ||
Height | U | 1,5 | |
Weight | kg | 7 |