Kód tovaru: M76317

€1405.87

Bez DPH	Cena s DPH	Zľava	Počet	Platnosť
€1142.99	€1405.87	0 %	od 1 ks.

K dispozícii

Alternatívy

Hikvision iDS-7216HUHI-M2/X(STD) 16-kanálový HD-TVI rekordér (8 Mpix, 8 fps, H.265, 8 x Acusence, HDMI, VGA) Kód: M76316

Ponuka: AnalógHD Knižnica: SUNELL (3), HIKVISION (15), DAHUA (8), Bezkontaktné meranie telesnej teploty (3), Počítanie ľudí (1), Základné vedomosti (21), Výber komponentov (5), Technická podpora (3), Monitoring objektov (4).

Záruka

3-ročná záruka.

Podpora

Máš otázky alebo úvahy?

Napíšte nám!

Detaily

The iDS-7216HUHI-M2/X is an 16-channel, multi-system DVR capable of recording video from cameras HD-TVI, AHD, CVBS and IP.
The DVR for an analog system can record images with the following resolution and frame rate:

8 MP at 8 fps (for HD-TVI system)
5 MP at 12 fps
4 MP at 15 fps
3 MP at 18 fps,
2 MP (1080p) and below 25 fps

In a standard mode of operation, 16 analog cameras can be connected to BNC inputs, as well as 8 IP cameras with a resolution of up to 8 MP. If any of the analog channels are not used, they can be turned off, allowing additional IP cameras to be connected. f all analog channels are disabled, as many as 24 IP cameras can be connected.

Key features:

HD-TVI signal recording with 8 MP resolution at 8 fps, 5 MP (3K) at 12 fps, 3 at 18 fps, 1080p and below at 25 fps
Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 8 MP, Hikvision brand or others via Onvif)
possibility to replace analog channels with IP in 1:1 ratio
extended IP camera mode (Enhanced IP - excludes VCA analysis)
AI functions: motion detection 2.0 (8 channels) or perimeter protection (8 channels) or face detection and recognition (4 channels)
AcuSense - alarm filtering with human/vehicle classification
H.265+/H.265/H.264+/H.264 encoding
HikConnect cloud support

Enhanced IP mode

Activating Enhanced IP mode increases the number of supported IP channels. It is possible to support up to 16 IP cameras with a resolution of 4 MP (the number of cameras can be expanded to 32, if all analog channels are disabled).

In Enhanced IP mode, the Intelligent Events (IVS) function on analog channels is disabled, and the resolution of HDMI/VGA video outputs is limited to 1080p. To activate this mode, direct access to the DVR menu is required.

AI functions

The DVR can perform the following AI functions: motion detection 2.0 (8 channels), perimeter protection (8 channels) or face detection and recognition (4 channels).

Motion detection 2.0

Motion Detection System 2.0 can analyze motion detection events for human or vehicle detection. Thanks to that, alarm notifications are filtered and unnecessary alarms are blocked.

Face recognition

The DVR has a function to capture and analyze faces on a certain number of channels. It is possible to create libraries of faces that will later be used to search the recordings. Related actions can also be specified , that will be executed in case of a correct or incorrect comparison between a detected face and a face that is in the library, such as triggering a beep in the recorder, an alarm in the monitoring center, sending an e-mail, controlling an alarm output etc. Faces, already recorded on the DVR or from an external source, can be added to the library. Recordings stored on the DVR, can be easily and quickly searched after pointing to a specific face, on channels on which the face recording and comparison function was active.

Artificial intelligence AI and AcuSense technology

Artificial intelligence plays a key role in CCTV systems. Cameras and recorders with AcuSense technology analyze the image based on a deep learning algorithm. They reflect the structure and principles of the human brain. As in the brain, learning creates connections between artificial neurons (programs) and creates a multi-layer artificial neural network. The algorithm individually analyzes model photos and recordings, looking for common features, and then creates appropriate connections. The so-called layers, responsible for detecting a specific feature, are built this way. The more layers an algorithm has, the more accurate the analysis is. Therefore, teaching with large amounts of data is crucial. Only multi-layer networks can collect information and perform appropriate actions, in particular automatic extraction and representation of features (patterns) present in the data, teaching the network for example to recognize faces, vehicle brands, animal species or incident, e.g. a fall. This model of DVR has 8 channels with AcuSense function.

On eight analog channels, it is possible to run virtual line crossing detection (together with line crossing direction determination) and intrusion detection in a quadrant area. Events can be filtered for human or vehicle detection.

H.265 / H.265 video compression

The DVR can record one or two video streams (primary and/or secondary) from each channel. The video can be compressed using the H.265 method. Compared with its predecessor (H.264), H.265 can reduce the data stream by half, which translates into proportional disk space savings and extended data retention time. H.265+ can further minimize the streams in typical video surveillance scenarios.

Sophisticated client software

Client software iVMS-4200 is used to view, supervise and configure Hikvision analog DVRs, network DVRs and IP cameras (it allows you to create a hybrid system) via the network. The application allows you to manage up to 256 devices on up to 4 monitors. One screen can display images from up to 64 cameras. In addition to viewing and configuration, it allows, among other things, remote playback of recordings, display of alarm messages, two-way audio transmission, use of multi-level e-maps for viewing.

The control panel of the iVMS-4200 application

Hik-Connect is a mobile application designed for cell phones based on Android and iOS operating systems. It can be used to remotely view live video from DVRs, NVRs, network cameras using the Wi-Fi, 2G or 3G and also to view recordings stored on the DVR. The application allows connectivity via IP addresses and via P2P cloud.


The start menu of the Hik-Connect app with a live view thumbnail	The live view screen

Working in the cloud

Hik-Connect is a network service designed for Hikvison devices. It integrates P2P cloud for remote viewing via smartphones and tablets. It provides a wide range of surveillance and basic configuration options: live monitoring (also multiple channels simultaneously), PTZ control, digital zoom, eavesdropping, playback of recordings from the archive and alarm notifications (zone violation, line crossing, etc.).

Main features of the Hik-Connect service:

only basic network configuration required
no external IP address, port forwarding required
connectivity via p2p network via cloud via client app for Android and iOS smartphones
image encryption

Advanced applications for organizing and operating CCTV systems

Our library provides an overview of applications dedicated for installers and users of monitoring systems based on Hikvision devices.

The main window of the SADP software

SADP (Search Active Device Protocol) is a free and easy-to-use software designed to search the local network for Hikvision brand cameras and DVRs, modify network parameters and restore passwords. For detailed information on password restoration (item 8) and operation of the program, please refer to the library SADP application – a tool for organizing CCTV systems based on HIKVISION devices in a local network.

Technické dáta

Model
Product type
Brand			Hikvision
Series			TurboHD 5.0
Parameters
Analog video inputs			16
Analog video inputs	Maximum resolution	MP	5, 8
	Signals supported		multi-system (HD-TVI, HD-CVI, AHD, CVBS)
	default signal		HD-TVI
	exchangeable for IP		Yes 1:1
IP video inputs	number in standard mode		8
IP video inputs			24
	number in Enhanced IP mode (4 MP limit)		16
	Number after switching off analog channels in Enhanced IP mode (4 MP limit)		32
	Maximum resolution	MP	8
Operating band	total (input and output)	MBps
Recording	Video compression		H.265+/H.265/H.264+/H.264/MPEG4
Recording	speed for default signal	fps	8 for 8 MP, 12 for 5 MP, 14 for 4 MP, 15 for 3 MP, 25 for 2 MP and below
	speed of other HD signals	fps	12 for 5 MP, 14 for 4 MP, 25 for 1080p and below
	bitrate of a single video channel		32 Kb/s – 10 MBps
	Audio compression		G.711U
	audio channel bitrate		64 Kbps
Max. resolution of video outputs	HDMI 1	px	3840 × 2160 (4K)
Max. resolution of video outputs	VGA 1	px	1920 × 1080
	BNC		704 × 576 (CVBS)
Video output modes			Parallel HDMI1/VGA1
Decoding	synchronous playback
HDD	number of SATA II interfaces		2
HDD	max. capacity of each HDD	TB
Image analysis (conventional algorithm)
Basic incidents			, , , ,
Advanced incidents			, ,
Intelligent image analysis (Deep Learning algorithm)
AcuSense	Filter falošného poplachu	number
Filter human, vehicle			, , ,
Other incidents
Interfaces
USB			1
USB
Two-way audio			Yes
Audio	Input		4, RCA
Audio	Output		1, RCA (linear, 1 kOhm)
Alarm inputs/outputs			Yes
Alarm	Input		16
Alarm	Output		4
Serial interfaces			RS-485
Ethernet			1 × RJ-45 10/100/1000
Others
Applications			Hik-Connect, iVMS-4200
Archiving			USB,
Network protocols			TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP™, HTTPS, ONVIF
Power supply output	DC	V	12
	DC	A	5
Power consumption (without HDD)	DC	W	19
Pracovná teplota		°C	-10 ...+ 55
Humidity		%	90 or less (non-condensing)
Dimensions (W × D × H)		mm
Height		U	1
Weight		kg	2,1