MÔJ KOŠÍK
Môj košík je prázdny

Káble

Analógový systém

Cat. 5e U/UTP Cable: NETSET U/UTP 5e Cca s1a,d1,a1 /500m/
Kód tovaru: E1415_500
Bez DPHCena s DPHZľavaPlatnosť  
345,64 EUR414,77 EUR0 %
Záruka - 15 rokov
The NETSET BOX U/UTP 5e cable far exceeds the requirements for Category 5e twisted pair cables.
NETSET cables are compliant with the Construction Products Regulation (CPR) and EN 50575 harmonized European standard that specifies reaction to fire performance requirements, test and assessment methods for electric cables for use in construction works.
According to guidelines of the Association of Polish Electrical Engineers guidelines, CPR class Cca cable must be installed outside escape routes in the following buildings:
  • residential and community residences
  • high (25 to 55 m) and high-rise (more than 55 m) above ground level or residential with more than 9 to 18 overground storeys inclusive
  • having rooms intended for the simultaneous presence of more than 50 persons who are not their permanent occupants, and not intended primarily for the use of people with reduced mobility
  • primarily for the use of people with reduced mobility, such as hospitals, nurseries, kindergartens, homes for the elderly
  • commercial.
The requirements for using cables with a specific reaction to fire class in a given type of building should be based on a risk analysis made by the installation designer or other national formal and legal documents. The CPR Directive does not impose on the EU Member States the requirements for types of buildings and associated cables with specific fire reaction classes. The reaction to fire class of cables and other conductors installed within evacuation routes should not be less than B2ca-s1b, d1, a1. For this purpose, class B2ca cable - E1615_500 - NETSET U/UTP category 6 B2ca-s1a-d1-a1 cable should be used.
Cat. 5e U/UTP Cable: NETSET U/UTP 5e Cca s1a,d1,a1 /500m/
Packaging
Cat. 5e U/UTP Cable: NETSET U/UTP 5e Cca s1a,d1,a1 /500m/
Close-up of the cable
The NETSET U/UTP cat. 5e 5e is the finest-quality twisted pair cable designed for professional data transmission systems inside buildings.
The NETSET cable comes from the latest generation of UTP twisted pair cables. Its external diameter has been reduced to 5.0 mm, which considerably facilitates insertion of the cable into ducts and pipes. Special insulation material makes it easier to attach RJ-45 connectors.
Distinguishing features of the NETSET UTP PE 5e cable:
  • top quality materials, made to tight specifications, proven with a, 15-year quality guarantee,
  • flammability class Cca s1a s1a, d1, a1
  • preliminary quality control of materials and thorough tests of the finished product,
  • meter markers,
  • cooper solid wires diameter 0.565 mm,
  • insulation of conductors made of insulating, mass-coloured HDPE, conductor diameter: 0.87 mm, insulation colors: white-green/green, white-orange/orange, white-brown/brown, white-blue/blue,
  • cable sheath made of LSZH compliant material, outer diameter 5.4 mm,
  • length marker print error max. 0.5%
The NETSET U/UTP cat 5e E1414 LAN cable is manufactured in compliance with the following standards:
EN50575:2014, EN60332-1-2:2004, EN50399:2011, EN60754-2:2014, EN 13501-6:2014.
The cable comes with a 15-year warranty.
The manufacturer guarantees the stability of parameters for at least 15 years, on the condition that the cable is packed, transported, installed, and used according to adequate European standards (among others E-79100 and EN 50174-1), within the permissible environmental conditions.
The NETSET NETSET U/FTP Category 5e E1415 twisted pair cable is intended for use in an environment with temperature from -20oC to +50 oC. Installation temperature not lower than 0oC and not higher than +50oC. The bending radius should not be less than 8 times the outside diameter.
Specifications
ProductNETSET U/UTP Cat. 5e
Product codeE1415
Product typeTwisted pair cable 
BrandNETSET
Applicationsindoor
Category5e
Cable lengthm500
CPR classCca s1a,d1,a1
Physical properties
Conductormaterialcooper
diametermm0.49
Conductor insulationmaterialHDPE
diametermm0.87
Twisted pairsdiametermm-
colors white-green/green
white-orange/orange
white-brown/brown
white-blue/blue
Twisted pair shieldmaterial-
diametermm-
Conductor shieldmaterial-
diametermm-
SheathmaterialLSZH
diametermm5.4
thicknessmm0.7
colorlight gray
Gel filledNo
Rip-cordYes
SplineNo
Length marker print error%<5
Electrical parameters
ImpedanceΩ100
Nominal Velocity of Propagation NVP%69
Delay skewns/100m<45
Asymmetry in capacitance of transmission paths to the groundpF/100m-
DC resistanceΩ/100m9.38
Resistance asymmetry%5
Mechanical properties
Operating temperature°C-20...70
Installation temperature°C0...50
Minimum bending radius for indoor installationcable diameter>8
Packaging
Cardboard boxdimensionscm-
Spooldiametermm-
widthmm-
spool hole diametermm-
Test results
  • Return Loss
Frequency [MHz]Result (min.) [dB]
120,0
423,0
824,5
1025,0
1625,0
2025,0
2524,3
31,2523,6
62,521,5
10020,1
  • Attenuation
Frequency [MHz]Result [dB]
12,0
44,1
85,8
106,5
168,2
209,3
2510,4
31,2511,7
62,517
10022
  • NEXT (near end crosstalk)
Frequency [MHz]Result (min.) [dB]
165,3
456,3
851,8
1050,3
1647,2
2045,8
2544,3
31,2542,9
62,538,4
10035,3
  • PSNEXT (power sum near end crosstalk)
Frequency [MHz]Result (min.) [dB]
162,3
453,3
848,8
10 47,3
1644,4
2042,8
2541,3
31,2539,9
62,5 35,4
10032,3
  • ELFEXT (equal level far end crosstalk loss testing)
Frequency [MHz]Result (min.) [dB]
1 63,8
451,8
845,7
1043,8
1639,7
2037,8
2535,8
31,2533,9
62,527,9
100 23,8

 

  • PSELFEXT (power sum equal level far end crosstalk loss testing)
Frequency [MHz]Result (min.) [dB]
160,8
448,8
842,7
1040,8
1636,7
2034,8
2532,8
31,2530,9
62,524,9
10020,8

Bez DPHCena s DPHZľavaPlatnosť  
345,64 EUR414,77 EUR0 %
 
Cat. 5e U/UTP Cable: NETSET U/UTP 5e Cca s1a,d1,a1 /500m/
Kód tovaru: E1415_500