FRP Duct Rodder (Ø5.5 mm, 50m, yellow)
Kód tovaru: L96605
Duct rodder (pilot) for pulling cables in ducts, made of FRP glass fiber with 6 mm diameter and a length of 50 meters on a special frame/rack to facilitate its use. The highly elastic fiber rod with high bending and tearing strength is covered with yellow PE plastic jacket for protection and good slip properties. The blue, powder-coated frame is equipped with a manual brake blocking the drum, and a special eye loop to guide the fiber. The construction of the rack ensures easy transport, storage and use. The end of the fiber rod is terminated with a guide head.
The rodder is used to pull cables in new and old ducts in the ground and in buildings.
Applications:
  • Pulling cables between cable vaults
  • Pushing cables under roads
  • Installing cables in suspended ceilings
  • Cleaning, clearing conduits, ducts etc.
  • Pulling cables through casing pipes
Specifications
  • Dimensions: 56x18x68 cm
  • Rod diameter (with jacket): 6 mm
  • Length: 50 m
  • Weight (with frame/rack): ca. 8 kg
 
FRP Duct Rodder (Ø5.5 mm, 50m, yellow)
Kód tovaru: L96605