Surge Protection Installation Box: Signal ZPZ-12 (12 paths, for multiswitch systems)
Kód tovaru: R48612
Front view
Bottom view.
Cables are inserted into the box through the elastomer cable glands.
Cables are inserted into the box through the elastomer cable glands.
The box contains 12 Signal surge protectors with F-m to F-f adapters
Signal ZPZ-12 surge protection installation box R48612 has been designed for comprehensive protection of SMATV systems based on multiswitches. The device protects all the satellite and terrestrial TV paths (12) against voltage surges induced in signal lines by lightning strokes.
The box has been equipped with 12 Signal TV-Sat surge protectors R48602 that can protect:
- satellite paths from 2 satellites (8 coaxial lines - 4 polarization-band pairs from each satellite),
- 2 terrestrial radio paths (FM, DAB),
- 2 DVB-T paths (UHF1, UHF2).
Typical application in a SMATV system
Key features
- 12 surge protectors for 12 signal lines,
- for outdoor or indoor use, made of PA 11 aluminum alloy, powder-painted in RAL 7035,
- sealed and earthed door, mounted on two hinges, closed with a cylinder lock,
- wall- mounted,
- holes for cables with elastomer cable glands,
- grounding connector (6 mm diameter, with cable eyelet),
- cardboard packaging.
The box should be used at the input of a SMATV system, between antennas and the first active components (usually SAT/TV amplifiers). The box has to be grounded pursuant to the applicable regulations.
The construction of the box allows for the use of different types of F connectors and easy organization of coaxial cables. The recommended cable for connecting the protectors with antenna equipment is Triset-113 PE E1017, the best F-connectors are MASTER F 113 E80342. The output cables can also be Triset-113 PE E1017, or - in the case of long distances - Triset-11 PE E1025 (terminated with MASTER 11 E80362 F connectors).
Specifications
| Name | Surge Protection Installation Box Signal ZPZ-12 |
| Code | R48612 |
| Number of surge protectors | 12 |
| Mounting | To a wall, 4 holes with 5.6 mm diameter, 234x180 rectangular base |
| Cable routing method | Top to bottom |
| Input/output connectors | F-f |
| Working environment | Indoor/outdoor |
| Number of input holes (glands) | 12 |
| Number of output holes (glands) | 12 |
| Diameter of input/output holes [mm] | 16.5 |
| Cable glands | 24; PDEN 16M thermoplastic TPE elastomer, for 5-11 mm cables |
| Box material | PA 11 aluminum alloy |
| Finishing | RAL 7035 |
| Door | Grounded, rubber gasket in the body, two hinges, cylinder lock |
| Grounding connector | Yes, diam. 6 mm, cable eyelet |
| Dimensions [mm] | 305x250x110 |
| Weight [kg] | 2.0 |
| Surge protector paths | |
| Operating band [MHz] | 5 - 2400 |
| Inputs | F-f |
| Outputs (via the installed adapters) | F-f |
| Insertion loss [dB] | typ. 0.8 at 1 GHz typ. 1.2 at 2 GHz |
| Return loss [dB] | typ. 12 |
| Maximum current (8/20 µs) [kA] | 8 |
| Impedance [Ω] | 75 |
| DC pass-through | Yes |
| DC breakdown voltage at 100 V/s [V] | 230 +/-42 |
| Screening efficiency [dB] | > 90 (EN 50083-2/A1; A class) |
| Protection level at 1 kV/µs [V] | ≤ 800 |
Surge Protection Installation Box: Signal ZPZ-12 (12 paths, for multiswitch systems)
Kód tovaru: R48612