MÔJ KOŠÍK
Môj košík je prázdny

Vyradený tovar

Double Bistable Relay F&Wave FW-R2D (for DIN rail)
Kód tovaru: F3222
Tovar bol stiahnutý z ponuky
Double Bistable Relay F&Wave FW-R2D (for DIN rail)
General view
Double Bistable Relay F&Wave FW-R2D (for DIN rail)
View of the packaging
FW-R2D module is composed of two bistable relays, each with one output contact (16A/250VAC), controlled wirelessly or locally (with potential-free monostable contacts/switches).
F&Wave is a family of devices managed wirelessly over distances up to 100 m, for control of various electrical appliances. The receivers/actuators have versions suited for installation on DIN rails (1S modules) or for placing in Ø60 round recessed boxes. They can be controlled via additional local buttons, or remotely, with handheld or fixed remote control units. A unique feature of the system is the retransmission of the control signals through the modules, which improves reliability and extends the range of operation.
Short pressing of a monostable switch connected to a local input results in changing the state of the output of the corresponding relay to the opposite. Long pressing of the switch (above 5 seconds) always sets the output of the relay to ON state, continued to the moment of releasing (at this moment the state changes to OFF). This feature can be used for synchronizing a group of relays (and connected loads) controlled by the same local switch.
The FW-RC4 F3104 and FW-RC10 F3110 remote controls operate as bistable switches: consecutive pressings of the dedicated button result in alternate switching ON and OFF the relay/load. The FW-RC5 F3105 control also has separate inputs for connecting "always switch ON" and "always switch OFF" switches.
Key features
  • Two bistable relays,
  • Designed for F&Wave wireless systems,
  • Can be controlled from up to 8 remote controls,
  • Can be controlled locally with any monostable potential-free contacts,
  • Two independent isolated NO contacts, each with 16 A / 250 VAC switching capacity (AC-1),
  • Compact size (1S),
  • Retransmission of control commands for higher reliability and wireless range extension,
  • Very low power consumption,
  • Built-in thermal overload protection.
10-button Remote Control: F&Wave FW-RC104-button Remote Control: F&Wave FW-RC4Single Bistable Relay F&Wave FW-R1D (for DIN rail)Single Bistable Relay F&Wave FW-R1P5-button Remote Control: F&Wave FW-RC5 (for Ø60 box)
Applications of F&Wave system

  • A - a LED strip
    • LED strips are controlled with dedicated controllers, managed by local buttons connected directly to a controller, or, more conveniently, by handheld remote controls. The strips can be switched on/off and dimmed. There are two versions of 2-channel LED controllers:
      • FW-LED2P F3421,
      • FW-LED2D (to be mounted on DIN rail F3422).
  • B - a roller blind
    • Roller blinds are controlled with dedicated controllers, managed by local buttons connected directly to a controller, or, more conveniently, by a handheld remote control. There are two versions of the controllers (230 VAC):
      • FW-STR1P F3521,
      • FW-STR1D (to be mounted on DIN rail F3422).
  • C - an electrical appliance with switch ON/OFF control
    • This type of devices can be controlled with relay modules. The dedicated relay modules are composed of one or two relays. The switch ON/OFF function can be performed locally (with additional keys connected to a module) or wirelessly, by a handheld remote control. The available relay modules:
      • Single bistable relay FW-R1P F3211,
      • Single bistable relay FW-R1D (to be mounted on DIN rail F3422),
      • Double bistable relay FW-R2D F3221,
      • Double bistable relay FW-R2D (to be mounted on DIN rail F3422).
  • D - a dimmable light source
    • The control of dimmable light sources is carried out by dedicated dimmers. A light source can be switched ON/OFF and dimmed/lightened to a desirable level either locally (with additional keys connected to the dimmer module) or remotely (a handheld remote control). The available dimmers:
      • Wireless dimmer FW-D1P F3311,
      • Wireless dimmer FW-D1D (to be mounted on DIN rail F3422).
  • E - 5-button transmitter (to be placed in a Ø60 flush-mounted box)
    • The transmitter controls paired modules.
  • F - handheld remote control
    • Handheld remote controls allow users to control paired components of F&Wave systems. The available units:
Wiring diagram


Specifications
NameDouble Bistable Relay FW-R2D
CodeF3222
Power [VAC]85...265
Power consumption [W]1 W
Switching capacity
2 x 16 A / 250 VAC
Wireless interface frequency [MHz]868
Operating temperature range [°C]-25...65
Screw terminals [mm²]2.5
MountingDIN rail TH-35 mm
IP rating
IP20
Tovar bol stiahnutý z ponuky
 
Double Bistable Relay F&Wave FW-R2D (for DIN rail)
Kód tovaru: F3222