A short presentation how to compress F connector on TRISET-113 cable and BNC connector on RG-59 cable.
Cena s DPH | Zľava | Počet | Platnosť |
---|---|---|---|
€159.18 | 0 % | od 1 ks. |
Detaily
- zhoda s požiadakami triedy A
- prešiel testom IEC 68-2-3 Steady State Damp Heat
- 1,13 mm medené jadro
- nízky útlm
- perfektná zhoda,
- vysoká účinnosť tienenia - A+ trieda v drvivej väčšine rozsahu prenosu
- 81% opletenie
- 5-ročná záruka
Trieda\frekv. rozsah | 5-30 MHz [mΩ/m] | 30-1000 MHz [dB] | 1-2 GHz [dB] | 2-3 GHz [dB] |
C | 50 | 75 | 65 | 55 |
B | 15 | 75 | 65 | 55 |
A | 5 | 85 | 75 | 65 |
A+ | 2,5 | 95 | 85 | 75 |
A++ | 0,9 | 105 | 95 | 85 |
Technické dáta
Product type | Coaxial cable | ||
type | TRISET 113 | ||
Brand | TRISET | ||
Cable length | m | 200 | |
Aplikácie | |||
Cable class | RG-6 | ||
Compliance with relevant national legislation | Yes | ||
CPR class | Eca | ||
Gel-filled cable | No | ||
Fyzikálne vlastnosti | |||
Impedance | Ohm | 75 | |
Screening efficiency class | A | ||
Transfer impedance TI | mΩ/m | <5 | |
Conductor | Material | ||
Diameter | mm | ||
Dielectric | foaming | Physical | |
Diameter | mm | ||
shield | |||
No. of plies | 2 | ||
First foil | bonded to dielectric | Yes | |
Material | Al/PET/Al | ||
Dimensions | μm | 30/12/30 | |
total thickness | μm | 75 | |
Braid | Material | ||
wire diameter | mm | ||
no. of wires | pcs. | 24 × 6 | |
winding angle | degree | ||
braid coverage | 81 | ||
sheath | Material | PVC | |
thickness | mm | ||
Diameter | mm | ||
Color | |||
Elektrické parametre | |||
Resistance at 20°C | Ω/km | ||
capacity | pF/m | 52 | |
Wave reduction factor | 84 | ||
Mechanické vlastnosti | |||
Pracovná teplota | °C | -30...+70 | |
Installation temperature | °C | -5...+40 | |
Minimum bending radius | mm | 35 (single) 70 (repeated) | |
Packaging | |||
Spool | Diameter | mm | 290 |
Width | mm | 200 | |
spool hole diameter | mm | 120 | |
m | 200 |
Filmy
Practical implementation of a home junction box.
Top-quality F-connector Platinum for use on TRISET-113 coax. The connector has been designed to ensure watertightness (after crimping) both from the side of the cable and the device. During compression of the connector another plastic bush is tightly pressed against the sheath of the cable (by putting on cone brass case - the compression ring). The plastic material is protected by patent Delrin of well known for quality of products DuPont company. It is UV-proof, and ensures stable physical parameters in very wide temperature range. The metal parts of the connector made of nickel-plated brass are corrosion-proof.