Môj košík je prázdny

Média konvertory


Media Converter: ULTIMODE M-100G/SFP
Kód tovaru: L1301
Bez DPHCena s DPHZľavaPlatnosť  
41,96 EUR50,35 EUR0 %
Záruka - 24 mesiacov
ULTIMODE M-100G/SFP media converter with replaceable fiber optic modules allows to change electrical signals (Ethernet data) coming via typical STP/UTP cable into modulated light signal transmitted via fiber optic cable, using an SFP module.
Media converter ULTIMODE M-100G/SFP will be ready for operation after installing
Media Converter: ULTIMODE M-100G/SFP
View of the ULTIMODE M-100G/SFP media converter
Media Converter: ULTIMODE M-100G/SFP
Opposite side view
Ethernet Media Converter M-203G (pre dva single-mode vlákna do 20 km)
View of the included AC/DC adapter
Distinguishing features:
  • 1 x Ethernet 10/100/1000 Mb/s Ethernet port (RJ-45)
  • SFP slot (IEEE 802.3z 1000Base-FX)
  • LEDs indicating operation status
  • easy installation (plug and play)
  • external AC/DC adapter included
ULTIMODE M-100G/SFP media converter equipped with SFP slot allows for cooperation with multimode or single-mode optical fibers, depending on the module chosen. All optical transmission parameters depend on the SFP module. ULTIMODE M-100G/SFP can cooperate with SFP modules compliant with IEEE 802.3z 1000Base-FX standard.
ULTIMODE devices have MDI/MDIX auto detection feature and automatically find and set the fastest connection speed and mode. "Store and forward" mechanism allows to verify the received data using checksum function.
ULTIMODE M-100G/SFP is fully compatible with 10Base-T, 100Base-TX, 1000BaseTX/FX standards. Their installation is very simple thanks to "Plug and Play" feature. The LED indicators show current operating status.
Application of media converters with interchangeable SFP modules allows to use the devices in multimode and single-mode networks for data transmission via two optical fibers or via single fibers using WDM or CWDM transmission. The solution is especially cost effective when planning future expansion of the network (in this case it is sufficient to exchange only the SFP modules).
Standards:IEEE 802.3, IEEE 802.3u, IEEE 802.3z
LAN ports:10/100/1000Base - TX
RJ-45 UTP/STP, cat. 3, 4, 5, max. 100m
Optical interface:SFP (IEEE 802.3z 1000Base-FX)
Transmission speed:Depends on SFP module
Power:5VDC/1A (AC/DC adapter incl.)
Operating temperature range:0... 60 oC
NOTICE!! It is not allowed to look directly at the fiber port when the device is plugged. The radiation invisible for the human eye can damage the retina!
Media converter M-100G/SFP is compliant with IEEE 802.3z 1000Base-FX standard, which enables the device to cooperate with GbE SFP modules. We offer several GbE SFP transceivers:
ULTIMODE SFP transceivers cooperating with M-100G/SFP media converter
Type of optical fiber:multimodesingle-mode
Transmission range:2 km20 km
Transmission speed:1.25 Gb/s1.25 Gb/s
Wavelength (Tx/Rx):1310/13101310/15501550/1310
Connectors:2x LC2x LC1x SC1x SC
Media converter M-100G/SFP does not cooperate with Fast Erthernet SFP transceivers
(L1401, L1411: 155 Mb/s) for IEEE 802.3u 100Base-FX standard.
Why to choose fiber optics:
  • possibility of sending signal over long distances (low attenuation of optical fibers - e.g. for the wavelength of 1550 nm the attenuation is about 0.2 dB per kilometer, which means that the signal can be sent at a distance of 200km - without regeneration)
  • high-volume information transfer via single fiber
  • resistance to electromagnetic interference
  • resistance to weather conditions (humidity, electrostatic discharges and others)
  • no tapping possibility
  • low weight and small dimensions
Bez DPHCena s DPHZľavaPlatnosť  
41,96 EUR50,35 EUR0 %
Media Converter: ULTIMODE M-100G/SFP
Kód tovaru: L1301