Slovenský
Polski
English
Česky
Deutsch
Irish
Magyar
Português
Română
Tovar bol stiahnutý z ponuky
Alternatívy
Podpora
Detaily
LC konektory sa jednoducho inštalujú a poskytujú možnosť použitia veľmi pevných optických portov.
ULTIMODE patch cords are characterized by low attenuation and back reflection (reflectance). They use highest quality ferrules. Each patchcord passes individual quality control (inspection of surfaces and measurement of transmission parameters - insertion and return loss).
The single-mode optical fiber with low water peak used in the patch cords is compliant with ITU-T G.652.D standard. It provides full compatibility and ability to perform quality splices with existing fiber-optic networks. The average attenuation of the fiber is about 0.4 dB/km for 1310 nm, and 0.25 dB/km for 1550 nm. The optical fiber is reinforced by aramid fibers (Kevlar) and covered with PVC sheath.
The optical fibers compliant with ITU-T G.652.D are now among the best standard single-mode fibers on the market. Before introduction of the G.652.D recommendations, optical systems could use one of the three transmission windows with lower attenuation (I: 850 nm, II: 1310 nm, III: 1550 nm). Systems based on optical fibers with low water peak can work in the whole band from 1280 nm to 1650 nm.
Key features:
- konektory: 2x LC - 2x LC
- dva single-mode vlákna (G.652.D)
- dĺžka: 1.5 m
- nízka strata
Technické dáta
| Product type | Patchcord | ||
| type | Duplex | ||
| Fiber type | |||
| Connector type A | LC/UPC | ||
| Connector type B | LC/UPC | ||
| Connectors | LC/UPC – LC/UPC | ||
| Fiber standard | G.652D | ||
| Brand | ULTIMODE | ||
| Name | PC-555D | ||
| Length | m | 1,5 | |
| Insertion loss (IL) | A connector | dB | < 0.25 (A1, A2) |
| B connector | dB | < 0.25 (B1, B2) | |
Súvisiace produkty
